GoMachV's Pin Router thread (for reproducing 2d parts)
-
- Approved Member
- Posts: 802
- Joined: Tue Nov 08, 2011 9:43 am
- Location: Mount Airy , Maryland
- Been thanked: 1 time
Re: GoMachV's Pin Router thread (for reproducing 2d parts)
No need to search Ebay...You guys can do the stuff we need...You should make a thread in the BST about services and how much you would charge to do this...Nice work fellas...
Late Edinger Gold Pan # 6010 .....Vintage Blackfoot....Electrix Circuit Stadium Truck ....Kyosho Ultima Pro XL
- GoMachV
- Approved Member
- Posts: 11289
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 808 times
- Been thanked: 2338 times
Re: GoMachV's Pin Router thread (for reproducing 2d parts)
Like other experiences in my life, when you try to make a hobby into a business it gets frustrating and to a point burns you out.
I will do one-offs for people no problem. I don't want to be in the game for profit or production work.
Anyone that needs a part reproduced (within reason lol) just buy me some material and we are good.
I will do one-offs for people no problem. I don't want to be in the game for profit or production work.
Anyone that needs a part reproduced (within reason lol) just buy me some material and we are good.
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
-
- Approved Member
- Posts: 802
- Joined: Tue Nov 08, 2011 9:43 am
- Location: Mount Airy , Maryland
- Been thanked: 1 time
Re: GoMachV's Pin Router thread (for reproducing 2d parts)
Cool..Do you have any of the lowering towers for the rc10 ???? If not I can mail you a set to copy..
Late Edinger Gold Pan # 6010 .....Vintage Blackfoot....Electrix Circuit Stadium Truck ....Kyosho Ultima Pro XL
- GoMachV
- Approved Member
- Posts: 11289
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 808 times
- Been thanked: 2338 times
Re: GoMachV's Pin Router thread (for reproducing 2d parts)
I do not, but would be happy to copy some
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
-
- Approved Member
- Posts: 802
- Joined: Tue Nov 08, 2011 9:43 am
- Location: Mount Airy , Maryland
- Been thanked: 1 time
Re: GoMachV's Pin Router thread (for reproducing 2d parts)
PM me your address
Late Edinger Gold Pan # 6010 .....Vintage Blackfoot....Electrix Circuit Stadium Truck ....Kyosho Ultima Pro XL
- uniquenamehere
- Approved Member
- Posts: 553
- Joined: Tue Jun 07, 2011 6:34 am
- Location: Ontario, Canada
- Been thanked: 2 times
Re: GoMachV's Pin Router thread (for reproducing 2d parts)
This is why I love this site... Free internet beer for you good sir.gomachv wrote:Anyone that needs a part reproduced (within reason lol) just buy me some material and we are good.
- GoMachV
- Approved Member
- Posts: 11289
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 808 times
- Been thanked: 2338 times
Re: GoMachV's Pin Router thread (for reproducing 2d parts)
I really didn't want to use my last glass chassis for this particular project, soooooo.......
The color is the dead giveaway, but once it's not sitting right next to the real one its harder to tell
The color is the dead giveaway, but once it's not sitting right next to the real one its harder to tell
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- integra22t
- Approved Member
- Posts: 637
- Joined: Fri Aug 09, 2013 1:36 pm
- Location: Kingston On.Ca
- Been thanked: 2 times
Re: GoMachV's Pin Router thread (for reproducing 2d parts)
nice work might have to talk about doing some shock towers
have you ever looked at http://www.dragonplate.com/ for cheap carbon
have you ever looked at http://www.dragonplate.com/ for cheap carbon
- GoMachV
- Approved Member
- Posts: 11289
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 808 times
- Been thanked: 2338 times
Re: GoMachV's Pin Router thread (for reproducing 2d parts)
I haven't, but I'd be up for trying it gonna need some fresh bits but the few pieces of carbon I have done were no different than G10.
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- GoMachV
- Approved Member
- Posts: 11289
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 808 times
- Been thanked: 2338 times
Re: GoMachV's Pin Router thread (for reproducing 2d parts)
It's been a busy week!
I blame DennisM
(This is (er....was) my shop vac filter)
I blame DennisM
(This is (er....was) my shop vac filter)
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- klavy69
- Moderator
- Posts: 5145
- Joined: Thu May 29, 2008 4:11 pm
- Location: Fulton, IL (Land of one stop light but we DO have a windmill!)
- Has thanked: 550 times
- Been thanked: 261 times
Re: GoMachV's Pin Router thread (for reproducing 2d parts)
I'm thinkin you need a good prefilter for that shop vac filter
Todd
Todd
Peace and professionlism.....Kabunga signing off!!!
- GoMachV
- Approved Member
- Posts: 11289
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 808 times
- Been thanked: 2338 times
Re: GoMachV's Pin Router thread (for reproducing 2d parts)
Bought a nice hepa filter and a prefilter that seems to be meant more for foam but whatever keeps the $35 hepa filter alive is good for me
It's amazing how much you don't realize how much suction your loosing
It's amazing how much you don't realize how much suction your loosing
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- klavy69
- Moderator
- Posts: 5145
- Joined: Thu May 29, 2008 4:11 pm
- Location: Fulton, IL (Land of one stop light but we DO have a windmill!)
- Has thanked: 550 times
- Been thanked: 261 times
Re: GoMachV's Pin Router thread (for reproducing 2d parts)
I was thinkin your filter assy. wrapped in an 'outerfilters' mesh type prefilter. It would help keep your filter from getting all the gunk to clean out of it and washes easily up. I had one awhile back that was made for a K&N filter that worked great for my shop vac and spaced it off when I loaned it out. Never checked it when I got it back but when the loanee thought he was doing me a favor of replacing my filter he threw out the whole assy and put some $5 replacement offbrand on it .
Todd
Todd
Peace and professionlism.....Kabunga signing off!!!
- GoMachV
- Approved Member
- Posts: 11289
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 808 times
- Been thanked: 2338 times
Re: GoMachV's Pin Router thread (for reproducing 2d parts)
sounds like you have the same helpful friends that I do! Hahaha
Good news is I'm about caught up with all the g10 projects. Woot!
Good news is I'm about caught up with all the g10 projects. Woot!
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
- DennisM
- Approved Member
- Posts: 2403
- Joined: Sun Feb 26, 2012 7:07 am
- Location: Denmark
- Has thanked: 30 times
- Been thanked: 64 times
Re: GoMachV's Pin Router thread (for reproducing 2d parts)
Replicating my entire collection of fibreglass chassis buggy´s is not something I´d leave for just anybody to do Glad You took on the huge challengegomachv wrote:It's been a busy week!
I blame DennisM
(This is (er....was) my shop vac filter)
Gone fishing
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 71 Replies
- 6546 Views
-
Last post by Halgar
-
- 14 Replies
- 1518 Views
-
Last post by Jeep-Power
-
- 159 Replies
- 17360 Views
-
Last post by GoMachV
-
- 21 Replies
- 4150 Views
-
Last post by GoMachV
-
- 19 Replies
- 1753 Views
-
Last post by GoMachV
-
- 8 Replies
- 953 Views
-
Last post by MONSTER
-
- 18 Replies
- 1453 Views
-
Last post by SFC K
-
- 7 Replies
- 1215 Views
-
Last post by TamiyaTony
Who is online
Users browsing this forum: No registered users and 5 guests