Page 1 of 1
YZ10 '94 setup
Posted: Mon Jul 09, 2012 7:47 am
by naushad
Hi experts,
I'm going to run my yokomos
Mainly indoors
Got one with 11T and another with 13T
What pinion should I be using here? Also what is the drive ratio.
Any help would be appreciated!!
Re: YZ10 '94 setup
Posted: Mon Jul 09, 2012 10:48 am
by fakiee
naushad wrote:Hi experts,
I'm going to run my yokomos
Mainly indoors
Got one with 11T and another with 13T
What pinion should I be using here? Also what is the drive ratio.
Any help would be appreciated!!
I have a YZ10 gear ratio chart somewhere, i will try an upload it later.
Re: YZ10 '94 setup
Posted: Mon Jul 09, 2012 11:47 am
by naushad
Thanks!
Re: YZ10 '94 setup
Posted: Sun Aug 12, 2012 9:21 am
by naushad
This seems to have been forgotten...
Anyone...before I end up destroying motor and esc!
Some guide would be helpful as a starter..
Re: YZ10 '94 setup
Posted: Sun Aug 12, 2012 9:35 am
by scr8p
i'm sure that a quick email to
http://www.teamyokomo.com would get you your answer.
but i think it's 2.33, or something like.
Re: YZ10 '94 setup
Posted: Mon Aug 13, 2012 12:17 pm
by fakiee
naushad wrote:This seems to have been forgotten...
Anyone...before I end up destroying motor and esc!
Some guide would be helpful as a starter..
Not forgotten, it just takes a while when other stuff is going on. I picked them up last week, just need to upload pictures.
Cheers,
Andy
Re: YZ10 '94 setup
Posted: Mon Aug 13, 2012 2:19 pm
by naushad
Hi Andy,
Thanks for getting back in touch and taking the trouble to do this...look forward to see the chart.
BW
Re: YZ10 '94 setup
Posted: Thu Aug 23, 2012 4:14 am
by fakiee
naushad wrote:Hi Andy,
Thanks for getting back in touch and taking the trouble to do this...look forward to see the chart.
BW
NP here it is
http://www.rc10talk.com/viewtopic.php?f=29&t=28126
Cheers,
Andy