RC10Talk - The Net's Largest Vintage R/C Community

Not an RC10 you say ? I guess not its a rc10 frontend narrowed and two DS Rearends with aluminum TMS duallie WHEELS all around.One long arse clodbuster custom made chevy hardbody.Still needs the body work done after the plastic welding lol.Shocks i got from rc10johnny that screw adjust. Well today we got the chassis plate cut out and filed the edges down ,then tomorrow drill all the needed holes.Then trial fit it all see what needs custom filing to clear edges for arms.With dual trannies and motors i guess i need to turn one tranny around or do i?Will be usen super rooster esc to run it.DON

This thread is useless without pics!

I have seen this MONSTER about time Don!!!!!!!!!!!!!!!!!!!!!!!!!!!!11

This new ROCKWELL BLADERUNNER machine is the $#i0 works great.No telling what i will make out aluminum next lol.Still would like to find some bling to put on the truck.Forgot to add has two sets chrome MIP CVDS on her now and A&L steering kit too.Body works gonna take way longer than the chassis did.If someone would toss me a camera i could take pics hint hint lol.DON

Beg, borrow or steal a camera! We need to see this!

IVE been tryn get johnny down here to do just that but hes a 100 miles away.

Its been so long ive forgotten how post pics and need a new camera without all the fancy crap just a basic digital easy to download pics no video needed and not up on all that techno mumbojumbo.DON

Mine isn't a dually but sounds somewhat similar. Why would you have to turn one tranny around?

http://www.rc10talk.com/viewtopic.php?f=35&t=21340

Lowgear wrote:This thread is useless without pics!

here you go.....the "picture"..........

Im usen a super rooster esc and run one battery .If i can get the esc to work that is.Only one didnt crush the other daY that id had for years.Always ran in a clod and one motor is turned around .
So i dont haft to do anything but mount up normal like yours and rum the two wires off esc to one motor then two jumper wires to the 2nd motor?Don

Well the chassis been drilled today,not sure how much more i will get done today. Drilling all those gd holes in the chassis and gripping the drill so long my hand is killing me wrist too.{and no its not what some of you are thinkn SICKOS] Guess get the holes counter sunk if pain eases off a bit and trial mount everything then file on sides of chassis for final fittment. Boy wish i had pics for ya,all parts are black or aluminum.Plan on doing a standoff brace down the sides since its about the length an half of two stock chassis.DON

Its official its a ROLLER !!!! Looks awsume with the TMS Wheels on it.

Bad news my chest hurts and my van is DEAD as roadkill .Going to lay down a while.DON

Hope you feel better Don. Get rested so you can get back on this tomorrow. I am looking forward to seeing the pics of this beast.

Jake

no rush don. take a break buddy.

THANKS GUYS feeling better just tired now.Found out the front shocks are shorter than the rears and haft to drill lower holes in homemade front tower to mount them up.But the blue threaded shocks natural alloy adjuster and spring cup really stand out and the springs are blue to match the shocks .Not sure of the manufacture.Got them from rc10johnny a while back.Thanks Johnny.Project not been that hard,only had one hole had to hog out to get tranny screw to go in lol .Next got figure out what grit sandpaper to get for handsander to clean up all the scratches metal shop put into it on the shear machine. Then the next grit to polish it up.DON

Photos sent to me from Don to post...
-K