RC10Talk - The Net's Largest Vintage R/C Community

Here is my ride for the next weekend.
Will race with this setup.
In the trans there is this visco slipper system but otherwise the car is stock.
OK the body is the old one, protech.

http://jerryn.kuvat.fi/kuvat/RC.AUTO%20KUVAT/ASSO%20RC10%20WORLDS/

Jerzi

Trick front body mount , i like it and the car .

RC10Eh wrote:Trick front body mount , i like it and the car .

I really remember wy we started to put that body post overthere.
SIMPLE we had the old transponder in the front.
This was ( I think) in the late 80ees and beginning of 90ees.
Jerzi

In the trans there is this visco slipper system but otherwise the car is stock.

You mean Losi Hydra-drive or Schumacher Visco-drive?

Schumi visco slipper.
Jerzi

Can you post a pic of the visco-drive?

Here is the pic of the slipper.
http://jerryn.kuvat.fi/kuvat/RC.AUTO%20KUVAT/ASSO%20RC10%20WORLDS/IMG_0504.JPG

Jerzi

Last time this car was on track was in the middle of -90ees and the race was European Championships so there is an good history of this car so I have to drive very good in the race then.
I have this very old futaba radio http://tw.myblog.yahoo.com/jw!YNhz_X2AFRskPloYK1mB/article?mid=38 that I`ll use.
The servo is an old kopropo fet version.
Jerzi

Shakedown done. Runs like an old nice ferrari.
Soon to the track and see how it goes overthere.
Jerzi

Jerzi wrote:Here is the pic of the slipper.
http://jerryn.kuvat.fi/kuvat/RC.AUTO%20KUVAT/ASSO%20RC10%20WORLDS/IMG_0504.JPG

Jerzi

Awesome! Can you give us more info? It's aluminium or? What spur gears does it use? Does it use an impeller like the hydra drive?

Charlie don't surf wrote:Awesome! Can you give us more info?

Jeroen has one http://forum.racing-cars.com/forum_posts.asp?TID=9324&title=installation-sheet-viscous-drive

Schumacher made layshafts for the XX and RC10 Stealth, possible others too.

Charlie don't surf wrote:

Jerzi wrote:Here is the pic of the slipper.
http://jerryn.kuvat.fi/kuvat/RC.AUTO%20KUVAT/ASSO%20RC10%20WORLDS/IMG_0504.JPG

Jerzi

Awesome! Can you give us more info? It's aluminium or? What spur gears does it use? Does it use an impeller like the hydra drive?

Sorry the only thing I can answer you is that the spurgear is original schumacher and the size is arround 100t. It doesnt have any print on the spurgear.
Jerzi

PS Found this in the web.
http://forum.racing-cars.com/forum_posts.asp?TID=9324

Thanks- that's a cool item!

Wow. Those are super rare. I NEED one!

Thanks for the pics. It looks like it will fit the stock Schumacher slipper spur.

I got one on my B2 that I got at the 93 Worlds.