Hey Guys I have a Video http://youtu.be/xadyvv4wwW4 up on my Youtube channel of a basher test I conducting. Check it out if your bored and give me suggestions on what you would like to see.
Can anyone suggest a decent cheap basher truck. I bought a second hand Tamiya Wild Dagger a short time ago for this purpose, I was hoping with twin motors it would tick along a bit but unfortunately not, it's a bit pants actually :roll: . I would...
I am not sure why but I was compelled to get an rc10t2. I managed to be offered one at a darn reasonable price so I picked it up.
I spent the afternoon fitting it up.
So far I have 12mm front hexes on the b4 25degree caster blocks and some t5m big...
Last post
So the new gears came today.
54 tooth spur and a 13t pinion. I also added got the proper 3/16 4-40 bhcs for the spur hold down. I was thinking that maybe at high speeds the spur could wobble.
I'm pretty happy with the proTek pinion packaging . It...
After my Ultima ( suffered a moderate damage during a bashing meeting with the usual gang, I decided to build a 'basher' Ultima for that sole purpose in order to keep my old 'racer' Ultima with its somewhat pricey hop ups for track action only. I...
Last post
rears are 2'' and fronts are either 2.1'' or 2.2''.
I won an ebay auction and picked up a B3 for $80 after shipping. I want to have a little fun with it. I would like to do lipo and brushless along with some bumpers and anything else it needs, and just beat on it and see how it does.
I heard thunder...
As the title says this will just be a budget basher build with nothing fancy (for now). Over time I will slowly upgrade the parts and make a more modernized buggy.
Last post
they are about equal to stock arms. They are a little tougher, especially if your arms are old and brittle. You could do the boiling water trick to freshen the stock ones, and just replace IF you break them. No significant improvement with the RPM...
Well, I have been here for a while now and posted no pics of myself or any of my cars. So I thought it was time to join the crowd and extend my level of participation.
I asked the question last week if I should bash or restore this car:
Bashing...
Last post
Here is the finished project, burnt shocks and all. On the shocks, the chemical bath that tried to eat them did manage to eat away the groove at the bottom of the body the snap ring sits in. I took some heat shrink tubing and a pinion gear and...
OK, long time no post. I've been very busy with crawlers but also worked on several vintage projects in parallel which means a lot of time passes without any actual project ending! Finally finished this one though.
Got this Ultima II for $20 off...
Last post
Yes, up front I used Triumph wheels. I had to use Triumph front axles as well since the wheels are narrower at the bearings.
I only have stick packs so this is what I use. I don't think saddle packs will have much advantage anyway, the way the...