Page 1 of 1
Parts to Identify 2
Posted: Wed Aug 03, 2011 10:08 am
by rangerg
A few more parts to identify:
Is the A+L steering for the Ultima, Optima, or Optima Mid?
Also, the gear and belt were on an Optima parts car, but what type is and was it really for the Optima?
Thanks!
RG
Re: Parts to Identify 2
Posted: Wed Aug 03, 2011 10:48 am
by Coelacanth
The upper left gear looks to be the Turbo Optima version of the center gear with the torque limiter spring. The original Optima/Javelin gear was a solid shaft.
Re: Parts to Identify 2
Posted: Wed Aug 03, 2011 1:10 pm
by losiXXXman
That's a Gear diff for ultima. And the outer gear as well. THe c'cranks are A&L, I think thay're the Ultima set, but could be Jrx2/T or RC10. Me LIKEY the hyperdrive pulleys as well - I'm assuming they are for an Ultima too.
Re: Parts to Identify 2
Posted: Wed Aug 03, 2011 1:35 pm
by tamiyadan
.
Re: Parts to Identify 2
Posted: Wed Aug 03, 2011 1:58 pm
by rangerg
That's what I wanted to know. Thanks for the help!
Re: Parts to Identify 2
Posted: Wed Aug 03, 2011 2:02 pm
by tamiyadan
.
Re: Parts to Identify 2
Posted: Wed Aug 03, 2011 9:24 pm
by adam lancia
Optima/Ultima if anything. The only parts from that lot that fit the Mid are the bellcranks.
Re: Parts to Identify 2
Posted: Fri Aug 05, 2011 5:22 pm
by Mr. ED
The belt drive parts are for the ultima also they replace the spur and second gear on the top shaft.
I've never seen these parts beside from the ads in RCCA.
The diff is ultima, not optima or mid: there's no chain or belt pulley on it.