Page 1 of 1
Another one, usage for a3030 narrow rear axle?
Posted: Thu Apr 21, 2011 2:29 pm
by mytimac
Can you tell I am going through a bunch of parts?
Tried google and can't find answer
I have yellow tag package of a3030. Says NEW Narrow Rear Axle Set.
Any ideas on this one? Later XX models, or maybe XX4 or Street Weapon.
Looks to be an optional or upgrade part. Gone through the explodes for XX, XX4, SW
Came after 1995 I think.
Thanks,
Dan
Re: Another one, usage for a3030 narrow rear axle?
Posted: Thu Apr 21, 2011 2:31 pm
by kenooze
pics please
Re: Another one, usage for a3030 narrow rear axle?
Posted: Thu Apr 21, 2011 2:42 pm
by mytimac
ok,
Re: Another one, usage for a3030 narrow rear axle?
Posted: Fri Apr 22, 2011 3:08 am
by kenooze
Strenge,
The A3015 is the usual rear axle.
They cames from the JRX2 to the xxx4.
The only special design I know feet the XXX BK2, but the usually fit the pins holes for both standard and specific length.
Re: Another one, usage for a3030 narrow rear axle?
Posted: Fri Apr 22, 2011 12:24 pm
by mytimac
Well, after checking the Wayback Machine. Looks like it was made before the XX4 and SW.
I am going to have to compare the 3015 and the 3030 together and see what difference there is.
Re: Another one, usage for a3030 narrow rear axle?
Posted: Sat Apr 23, 2011 3:41 am
by kenooze
XX4 and Street weapon used the A3015 !
Re: Another one, usage for a3030 narrow rear axle?
Posted: Sat Apr 23, 2011 5:18 pm
by mytimac
Ok, the clue was in the picture. The thin skims.
The a3030 has the pin hole closer to the hub. Then you can't use that thicker spacer and need the thin skims instead. This must have been used to put different rims on the older cars and maybe stay within a certain width.