Got this from a good mate. It started life as a Ferrari on road racer. A Optima Mid Custom chassis that Kyosho slapped on a nice shell with the cool 5 spoke star chrome wheels. My mate converted it to...
Last post
Spent the last couple days on this now.
I installed a new digital servo, Brushless speedie with a 8.5 sensored motor.
The gearing is around the right mark. The platinum shocks aren't that good and too stiff . The rear springs are modded Losi...
Ok here they are the top one with the blue and red body was the first one from ebay that had some issues. It had mismatched wheels and missing tranny parts, It cleaned up nice but I got it all dirty. I can't post before clean up or after pics files...
Last post
Sweet. You guys/girls are going to keep it up till I have to get me a truck. Well, I guess I kinda do have an RC10 truck :D Keep those photos rolling Chick.
This one will eventually be my runner. I have gone through most of it and it is really a nice low time buggy. I plan on putting on the lightweight Andy's A-arms and cleaning up the look of the body. Otherwise I am going to hopefully get some use out...
So, a while back I posted a pic of my RC10ce and my XX. I had been out of the hobby for quite some time and since getting back into it I've wanted to update my RC10.
So far I've done the front and rear conversion to run b3 rims, used rccarbonworks...
Last post
Slotcarrod: thanks! Btw, holy smokes that is a crazy collection you've got going there. Simply stunning!
I originally picked up a graphite buggy to make a runner then lost interest over time. In between I picked up these two other buggies. I need to pick a runner from these three and get rid of the rest. I've saved these parts from the sell pile so...
Last post
I've decided to keep the worlds chassis. It made the best sense rather than trying to build up aother gold pan.
Hello everyone, just recently got back into RC and I'm looking to make the old T3 a bit more competitive.
I Purchased a trackstar 7.5 brushless motor and a x-car 120a ESC, and I'm running the kit 87 spur, with pinions from 17 up to 22.
Even with...
Last post
A 7.5T motor seems to me to be a little high (low?) of a motor for a truck. I would think a 10.5-12T would be better. a 7.5 will be really fast, but not have the torque of the higher T number motors. Hence the speed on the straight, but not having...
so i got the car of ebay about 8 months ago it was someones runner then and i carried on the torch and ran it every day for months until about 6 weeks ago when i decided to powder coat it but first i cut down the sides and cut a worlds rear end into...
Last post
no i had to put it in at an angle just to take the pic
Ahrefs [Bot] and 27 guests