Page 1 of 5
Yokomo universal driveshaft's part # versus model?
Posted: Sat Jan 29, 2011 6:53 pm
by Bormac
Guys I have a selection of uni's for the YZ series of 4WD buggies and and wondering what part number belogs to what model?
Anyone have a list of some sort?
Also can anyone tell me which shafts suit the 91 model?
Re: Yokomo universal driveshaft's part # versus model?
Posted: Sat Jan 29, 2011 8:23 pm
by aip47-2008
ZC-421 = Front and rear 870C
ZC-421S = Hardened front & rear 870C
ZC-422 = Front long universal (wide front end kit for 870C
ZC-422A = Rear 91/93 works, YZ10
ZC-423 = Front YZ10
ZC-423S = Hardened Special Front YZ10
ZD-422 = Rear (hard) YZ10
ZD-423 = Front (hard) YZ10
Re: Yokomo universal driveshaft's part # versus model?
Posted: Sat Jan 29, 2011 10:15 pm
by Bormac
Many thanks. I also have -
ZC-421S ??
Re: Yokomo universal driveshaft's part # versus model?
Posted: Sun Jan 30, 2011 6:42 am
by Mr. ED
th last letter usually indicates some variation; in material or something similar... maybe 'S'trong? or 'S'teel?
Re: Yokomo universal driveshaft's part # versus model?
Posted: Sun Jan 30, 2011 9:14 am
by 59burst
usually H stands for Hard(ened), and S for Super Hard
Re: Yokomo universal driveshaft's part # versus model?
Posted: Sun Jan 30, 2011 3:32 pm
by GJW
so are you hard or soft jason?
Re: Yokomo universal driveshaft's part # versus model?
Posted: Sun Jan 30, 2011 5:48 pm
by fakiee
Argh! I thought the 91/93 universals were same size front and rear, if this isn't the case then one of my upcoming projects has just taken a turn for the worse
Re: Yokomo universal driveshaft's part # versus model?
Posted: Mon Jan 31, 2011 11:48 am
by fakiee
fakiee wrote:Argh! I thought the 91/93 universals were same size front and rear, if this isn't the case then one of my upcoming projects has just taken a turn for the worse
they are the same size for 91/93, what's the difference between the
ZC-422A &
ZC-423?
Re: Yokomo universal driveshaft's part # versus model?
Posted: Mon Jan 31, 2011 5:03 pm
by aip47-2008
The location for the set screw on the axle is different I believe.
Re: Yokomo universal driveshaft's part # versus model?
Posted: Tue Feb 01, 2011 5:06 pm
by tiger1
May I ask which universal (CVD) fits hotdog?
Re: Yokomo universal driveshaft's part # versus model?
Posted: Tue Feb 01, 2011 9:45 pm
by Justjoe
The Hot Dog is a Short wheel base works 93...Isn't it?
ZC-422A = rear 91/93 works, YZ10
ZC-423 = front 91/93 works, yz10
Re: Yokomo universal driveshaft's part # versus model?
Posted: Tue Feb 01, 2011 10:37 pm
by tiger1
Thanks for the info
Re: Yokomo universal driveshaft's part # versus model?
Posted: Fri Oct 07, 2011 1:01 am
by Bormac
Still need to work out part number ZC-421S. Anybody know?
Re: Yokomo universal driveshaft's part # versus model?
Posted: Fri Oct 07, 2011 2:00 am
by aip47-2008
Same as ZC-421, but the hardened version.
ZC-422A also has a hardened version in ZD-422.
ZC-423 has it's version in ZD-423 as well as an earlier hardened part # in ZC-423S
Aaron
Re: Yokomo universal driveshaft's part # versus model?
Posted: Fri Oct 07, 2011 3:33 pm
by fakiee
So the all driveshafts sold for the YZ10 (works 94) were of the 'hard' variety?