rpm gear cover

Moderators: scr8p, klavy69

3 posts • Page 1 of 1

Bud: Regular Member; Posts: 10; Joined: Tue Jul 04, 2006 6:06 pm

rpm gear cover

Quote

Post by Bud » Fri Jul 14, 2006 4:48 pm

Does anyone know where I can buy a rpm gear cover like this one, http://www2.towerhobbies.com/cgi-bin/wti0001p?&I=LXEV33&P=7 that will fit the original rc10 motor plate? I know they made them because I hve one. I'd like to find 3 more for my other cars. The lexan ones are kinda flimsey. Thanks, Bud

bensb4: Approved Member; Posts: 29; Joined: Wed May 17, 2006 7:29 pm

Quote

Post by bensb4 » Sun Jul 16, 2006 12:37 pm

ive look everywhere for the last 2 months with no luck.my lhs had them at a time i didnt have a rc10...go figure

try scoping your lhs i found a front nose plate nip at mine

Bud: Regular Member; Posts: 10; Joined: Tue Jul 04, 2006 6:06 pm

gear cover

Quote

Post by Bud » Sun Jul 23, 2006 2:13 am

The one I have I got on a rc10t I bought on ebay. Lhs is mostly planes and a few car parts. Not much help there. I guess I'll just have to keep watching for one on ebay. If I hit the mother lode, I'll let you know.

Post Reply

3 posts • Page 1 of 1

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Sign in

Similar Topics

Replies

Views

Last post

RPM Stealth Gear Cover Help

Last post by aip47-2008 « Fri Jun 25, 2010 3:00 am
Posted in Temple's RC10 Tech Forum
Replies: 5
by slotcarrod » Mon Jun 14, 2010 12:24 pm » in Temple's RC10 Tech Forum

First post

Is there a cut out by the outdrive on a RPM Stealth gear cover, like this?

Last post

There was a 93T gear cover for the RC10 and the JRX2! Hence the small cut out for clearance.

5 Replies

756 Views

Last post by aip47-2008
Fri Jun 25, 2010 3:00 am
Found an RPM gear cover...and I can't get it on the car.

Last post by DerbyDan « Wed Sep 25, 2013 5:54 am
Posted in Losi Forum
Replies: 6
by pmathews924 » Tue Sep 24, 2013 8:00 pm » in Losi Forum

First post

After searching for a while I finally scored the much sought-after RPM cover for my LRM slipper set-up, and I can't get anything on the forward-most screw. The old scans say to use a nylon 4-40 nut, and the smallest one I could find doesn't fit....

Last post

I use a small peice of rubber tube (peice of wire with the strands removed) its just a tight push-on fit but works OK.... think I might try the ball joint trick as that looks like it could be more secure?

By the way - you'll find that the slider...

6 Replies

758 Views

Last post by DerbyDan
Wed Sep 25, 2013 5:54 am
rpm trans case and gear cover

Last post by LowClassCC « Sun Mar 28, 2010 5:06 pm
Posted in Off-Topic / Chit-Chat
Replies: 7
by treehugger » Sun Mar 28, 2010 2:36 am » in Off-Topic / Chit-Chat

First post

so ive been hunting for the rpm case conversion for a couple of hours and no joy anyone have a link there used to be lots maybe we bought em all

also i remember a thread about rpm gear covers and how to mod them to fit rc10 does anyone rember this

Last post

anyone rember were the thread is for rpm i think b2 gear cover mods and how to get them to fit rc10

Paul

this one?

7 Replies

629 Views

Last post by LowClassCC
Sun Mar 28, 2010 5:06 pm
Gear Cover Help

Last post by rctenracer « Tue Apr 21, 2009 1:40 pm
Posted in Temple's RC10 Tech Forum
Replies: 4
by chris72983 » Mon Apr 20, 2009 9:54 pm » in Temple's RC10 Tech Forum

First post

I had 2 brand new stock ones, that I had picked up at the LHS. One for the runner and and for the shelf car. Well today, my runner took one good tumble and the gear cover split. Never had that happen until now. My question is, what is everyone else...

Last post

check out racer8838 on ebay he has some clear lexan covers for the rc10 gold tubs. I have purchased a few and they are already to go no trimming just have drill or ream the screw holes.

4 Replies

509 Views

Last post by rctenracer
Tue Apr 21, 2009 1:40 pm
t2 gear cover

Last post by harvey « Mon Jun 06, 2011 9:46 pm
Posted in RC10 Truck Forum
Replies: 3
by motomike » Thu Apr 28, 2011 2:55 pm » in RC10 Truck Forum

First post

What are the options for gear covers on the t2's? I am currently using a cover for the Thunder Tiger Phoenix XT but it really doesn't fit very well and the plastic is cheap and wants to split. I really would like to find a rpm cover for the t2 and I...

Last post

Try playing with the b4 moulded cover. It doesn't fit, but the top hole is okay, and for the bottom hole there might be enough meat in the motor plate to be re-drilled.

3 Replies

820 Views

Last post by harvey
Mon Jun 06, 2011 9:46 pm
Gear Cover

Last post by chophead69 « Wed May 29, 2013 6:12 pm
Posted in Temple's RC10 Tech Forum
Replies: 23
by DMAT » Wed May 08, 2013 4:24 pm » in Temple's RC10 Tech Forum
1

2
First post

So after looking on several sites, it seems like most gear covers for the rc10 t4 / b4 / sc10 can work on each other. I've also seen that while only using 1 screw, you can still mount a b4 gear cover on the old rc10.

My question now is why couldnt...

Last post

just a few more notes. It doesnt have very much clearance for a thick slipper. I dont think anything beyond the basic b4 slipper will fit. The 6 gear and stealth ones do fit but there is very little free room.

another note is im not sure which...
23 Replies

2290 Views

Last post by chophead69
Wed May 29, 2013 6:12 pm
Gear cover ID

Last post by dinglem « Sun Dec 04, 2022 12:29 pm
Posted in RC10 Buggy Forum
Replies: 1
by dinglem » Thu Dec 01, 2022 4:19 am » in RC10 Buggy Forum

First post

I am currently playing about with a very lightened MMS car, and have stumbled across a really thick, ribbed gear cover I have not seen previously. It came with a rare Demon Dart bodyshell and one person (Jamie Booth) has suggested he thinks this...

Last post

Latest update comes from Ian Diboll who informed me that Nick Adams did indeed have a gear cover made through his contacts at WASP Racing. Still not got 100% confirmation that this is the one however.

Anybody seen one like this before?

1 Replies

389 Views

Last post by dinglem
Sun Dec 04, 2022 12:29 pm
Which modern transmission cover for TRX-1? Answer: RPM B4

Last post by Lonestar « Sun May 20, 2018 3:26 pm
Posted in Traxxas Forum
Replies: 3
by Lonestar » Mon Mar 19, 2018 12:27 pm » in Traxxas Forum

First post

Howdy yall

need to get the black widow TRX-1 ready for a vintage meet end-May 8)

I've always ran her in the grassy yard without a transmission cover... but that time it'll be on a dusty/rocky old-school track, hence the need to equip her fragile...

Last post

Hi guys,

I wanted to give a quick update about this one.

I got my hands on a Rustler cover, but the bracket bit looked a bit odd, really.

I had an RPM B4 cover laying around... a quick blank assembly showed it could work, albeit with a smaller...

3 Replies

1368 Views

Last post by Lonestar
Sun May 20, 2018 3:26 pm

Return to “Temple's RC10 Tech Forum”

Who is online

Users browsing this forum: No registered users and 4 guests

rpm gear cover

rpm gear cover

gear cover

Create an account or sign in to join the discussion

Create an account

Sign in

Who is online

Login Register