RC10Talk - The Net's Largest Vintage R/C Community

So i got a nice brushed chassis in the bst (thanks Paul)
As i havent run any DS for a few months i stated getting some withdralw symptoms And as every build i do i always want to use DS parts it seemed only fair to just go with it on this one

build list parts so far

BME brushed alloy chassis
RPM T bulkhead
HPI 50mm shocks
DS front and rear arms
bolink rear shock tower
Lethal weapon trans
DS rear carriers
Hot Trick front wide nose
DS shiny CVD,s
Pan car F/R wheels and tire,s
1/4 inch alloy box for the braces
bellcranks alloy ballraced of of a graphite rc10

Electronics

novak 13.5 B/L motor
ESC Velineon VXL 3m 1/18
servo traxxas 2056 waterproof

i always like the foam pan car wheels they look mean and seem to grip good depending on the compund so i finally figured a way to mount them on a gear box car i used one of these


it is about a 1/32 to small so i rapped one band of electrical tape around it making sure to not overlap the tape. then cut about 8 grove,s into the tape and slighty into the plastic of the adapter , i then pushed it into hole with a large coin as to seat the adapter flush on the inside of the wheel.
Then a thick squirt of CA glue and let dry for 12hrs

the rest was plain sailing

the front will be the next design challenge i will have to make a custom shock tower .

Look'n sweet

loving that brushed looked! good choice

yes the more i build the less i feel i should run it its such a basic desinge, maybe i will just fold some alloy and make my own .
Its true the material used was thin so i can see why the screws holding on the nose dont hold on the 100 degree sink .

Paul

Paul,sweet lookin build...as always... the DO guys have a front shock laydown system that should work for the shocks,cant remember the name but I'm sure someone will know here,it has a center post that the shocks mount to,should work.. JohnnySr

Is it not the McAllister conversion perhaps?

Is that a Parma body? I have one thats a slant nose, and I was wondering if they ever did a normal 911. Looking good, I'm jealous!

they are definatly bolink i have a pair the other one is on my tekin DS

Paul

I did up my black BME chassis with my DS too.I need a rear tower like that to finish it.
DON

I like your vision.

Dang, I gotta get me one of those Lethal Weapons.

LTO_Dave wrote:I like your vision.

Dang, I gotta get me one of those Lethal Weapons.

i got three, two with kyosho out drive,s and i sat up till 4am on sta to get my first rc10 vertion and they are all going into runners

Paul