my first nitro car

[treehugger]

so i bought a kyosho alpha it should be here this week and have been told to get a tuned pipe was wondering if this would fit

http://cgi.ebay.com/RDLogics-Tuned-Exhaust-Pipe-serpent-kyosho-trinity-/280503281746?cmd=ViewItem&pt=Radio_Control_Parts_Accessories&hash=item414f4c6852

onto this

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=390184496591&ssPageName=STRK:MEWNX:IT

and is there any other easy hop ups to make it go better

thankyou for looking

Paul

[USA-1]

Hi, No, that won't work you have a rectangular exhaust port, you would have to find an old vintage exhaust manifold, but then again I have never seen a tuned pipe for that side exhaust.

I found an HPI tuned pipe that might work you would have to invert it and cut the pipe where it bends at the end.

http://cgi.ebay.com/1-10-HPI-Tuned-Pipe-Exhaust-Header-Set-/250627781303?cmd=ViewItem&pt=Radio_Control_Parts_Accessories&hash=item3a5a9472b7

[treehugger]

thanks usa typical my first foray into nitro and i buy an antique maybe i should walk before i run and just use the car and them start with the hop ups

Thanks

Paul

[USA-1]

Good thing you didn't listen to me I don't think it would have worked. I ending up making the mininum bid $1.99, well it's on my Nitrohawk now.

[purpletimbo]

Kyosho did a tuned pipe hop up designed for the Alpha, they are common over here, as they did the car as a parts magazine, and the tuned pipe left to the hop up end issues, I sold one to Aus a month ago unfortunately, plenty more about here, should be one over there somewhere.
http://cgi.ebay.co.uk/Kyosho-GX-12-Engine-exhaust-/260603340319?cmd=ViewItem&pt=UK_ToysGames_RadioControlled_JN&hash=item3cad2b661f
one shown with motor
http://cgi.ebay.co.uk/KYOSHO-PARTS-LARGE-EXHAUST-/260604743908?cmd=ViewItem&pt=UK_ToysGames_RadioControlled_JN&hash=item3cad40d0e4