RC10Talk - The Net's Largest Vintage R/C Community

Can i know if i can use the T2's rear bulkhead on a gold pan? Does any of the holes coincides? Or any possibilities or ample space to drill additional holes? Thanks in advance. David Lim

Hey David,holes line up fine,since no batt box I just run sideways. Johnny

Hi Johnny, thanks for the info buddy! Just completed my graphite runner and had a spare 'moon's craters' gold pan in hand. Thought of building it as another runner with assorted parts accessible on ebay/ online stores...

I think that the T2 rear bulkhead uses 4/40 screws to secured to the chassis. In this case, Its not possible to use it on the gold pan as the latter uses 8/32 right?

stock rc10 steering used 8-32.. mip ball bearing steering uses 4-40. s to answer the question you can use the 4-40 screws in the 8-32 holes but you can not use them the other way around.

LowClassCC wrote:stock rc10 steering used 8-32.. mip ball bearing steering uses 4-40. s to answer the question you can use the 4-40 screws in the 8-32 holes but you can not use them the other way around.

Roger roger...got it!