Page 1 of 1
Old chassis ID
Posted: Sun Mar 04, 2007 2:38 pm
by Sharkman
I got this chassis in a deal.Anyone possibly know what it is??It's 6-gear only,and looks to be graphite with glass in the center.
Other than about 7 un-necessary holes,it's real solid,and can be fixed up.
Posted: Sun Mar 04, 2007 2:39 pm
by Sharkman
bottom
Posted: Sun Mar 04, 2007 2:44 pm
by badhoopty
looks like a composite craft to me.
Posted: Sun Mar 04, 2007 2:54 pm
by teshreve
I agree. Based primarily on the diagonal, smoothish looking defects.
Posted: Sun Mar 04, 2007 3:47 pm
by Sharkman
Was this to be used with an upper deck,or by itself? thanks hoop,and Ron
Posted: Sun Mar 04, 2007 4:08 pm
by badhoopty
Sharkman wrote:Was this to be used with an upper deck,or by itself? thanks hoop,and Ron
i cant say for sure, as i dont know if cc offered a double decker chassis for a non-stealth rc10. cc did just offer the bottom plates as chassis' too, so there aint no problem building that up without an upper plate.
Posted: Sun Mar 04, 2007 5:35 pm
by Sharkman
Thanks Hoop, I'm gonna give Scr8ps' method a try (Thanks "J") with the 3M stuff. Appreciate the help gents.
Posted: Wed Mar 07, 2007 11:32 am
by 97T595
I HAVE THE SAME CHASSIS UNDER 1 OF MY RC10'S ALSO ITS A FIBERGLASS PIECE. I PUT THE CAR TOGETHER CIRCA 89 OR SO AND CANT REMEMBER FOR THE LIFE OF ME WHERE IT CAME FROM. MINE IS MINT, BUT THE EXTRA HOLES ARE IN MINE TO. YOU CAN SEE THE 2 SETS OF STEERING SERVOS HOLES IN THERE BY THE FRONT. IM STILL DIGGING THRU STUFF TO HOPE I HAVE SAVED THE HEADER CARD, AND BOY IS THERE A LOT OF STUFF