Page 5 of 5
Re: My first car - Mardave Meteor
Posted: Wed Aug 23, 2023 7:34 am
by Darkmard
dinglem wrote: ↑Wed Jun 01, 2022 12:56 pm
The standard kit shocks were shown that way even in the press pictures. I think part of it was because they leaked - fairly good fix is PTFE tape when sealing them up.... and also because they open and fill from the seal end... you can in fact undo them in situ and top up or change the oil.
Hi I’m refurbing a Meteor now. How much oil and what type have you found works best please, having just tried testing these and oil leaking everywhere I’d presumed they weren’t supposed to be oil filled? I have some light machine oil and PTFE tape to hand but no “proper” shock oil!
Re: My first car - Mardave Meteor
Posted: Wed Aug 23, 2023 7:34 am
by Darkmard
dinglem wrote: ↑Wed Jun 01, 2022 12:56 pm
The standard kit shocks were shown that way even in the press pictures. I think part of it was because they leaked - fairly good fix is PTFE tape when sealing them up.... and also because they open and fill from the seal end... you can in fact undo them in situ and top up or change the oil.
Hi I’m refurbing a Meteor now. How much oil and what type have you found works best please, having just tried testing these and oil leaking everywhere I’d presumed they weren’t supposed to be oil filled? I have some light machine oil and PTFE tape to hand but no “proper” shock oil!
Re: My first car - Mardave Meteor
Posted: Fri Sep 15, 2023 7:03 am
by Marky
650cst shock oil seems to work - its also thick enough to stay in the shock with the crappy plumbers tape seal.
I think the modified meteor article from june 1990 also reccomends some shock oil (prob 30wt motorbike oil).
Re: My first car - Mardave Meteor
Posted: Wed Sep 27, 2023 8:11 am
by Darkmard
Marky wrote: ↑Fri Sep 15, 2023 7:03 am
650cst shock oil seems to work - its also thick enough to stay in the shock with the crappy plumbers tape seal.
I think the modified meteor article from june 1990 also reccomends some shock oil (prob 30wt motorbike oil).
I went with 350cst pure silicone lubricant in the end, with some PTFE tape around the thread it’s sealed fine
…for now!
…for now!