Page 5 of 18
Re: RC10 B1.5
Posted: Mon Aug 30, 2010 5:31 pm
by Charlie don't surf
Yup, that works nicely
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
Re: RC10 B1.5
Posted: Tue Aug 31, 2010 1:08 am
by cyclepsych0
Re: RC10 B1.5
Posted: Sun Sep 05, 2010 2:17 pm
by rctenracer
What body are you going to use?
Re: RC10 B1.5
Posted: Sun Sep 05, 2010 11:17 pm
by scr8p
a viper. it's the only associated body that seems like it'll fit the shape of the t2 chassis nicely.
Re: RC10 B1.5
Posted: Mon Sep 20, 2010 8:34 pm
by scr8p
anybody with a t2 box or manual, could you let me know what electronics were used on the boxart? mainly the esc and receiver. i was planning on going with novak stuff, but i'm thinking that they should probably be lrp by that time.
Re: RC10 B1.5
Posted: Mon Sep 20, 2010 8:50 pm
by scr8p
nevermind, i just looked at the online manual.
i guess i could go a couple different ways. in one spot, they show to instal an esc, and it's and lrp. then show how to install the receiver, and it's a novak polaris. after that, they show the chassis with the novak receiver and a novak esc.
being as though the last chassis shot of the truck in the manual is fitted with novak stuff, i guess that's what i'll go with.
Re: RC10 B1.5
Posted: Tue Jan 25, 2011 8:33 pm
by scr8p
alright, typical slow progress from me
![Laughing :lol:](./images/smilies/icon_lol.gif)
, but it's starting to take shape. i have quite a few parts on the way for this. not everything to finish it, but it's getting much closer to completion.
Re: RC10 B1.5
Posted: Tue Jan 25, 2011 8:53 pm
by Charlie don't surf
What shocks are you putting on this car? And what about rims & tires?
Re: RC10 B1.5
Posted: Tue Jan 25, 2011 8:58 pm
by scr8p
the shocks will be .89 team shocks (b2), and 1.32 rears. the rearsa re on the way, the fronts at the lhs. but people know how fast i make it over
there.
the tires/rims will be the ones i got from you. 3 piece white 2.1 fronts, 2.15 white rears, and the worlds kit tires. well, the rears are anyway (8086 flat stubbies). the fronts i believe are actually for the b2. they look like the 8015's, but they're a little wider.
Re: RC10 B1.5
Posted: Tue Jan 25, 2011 9:14 pm
by scr8p
actually reg, i only got the tires from you. just remembered that.
the front are 2.15 x 1.02 with one angled rib. i think the 8015's are 2.15 x .95 or something like that with normal ribs.
Re: RC10 B1.5
Posted: Tue Jan 25, 2011 10:04 pm
by Charlie don't surf
I was going to say I didn't remember the rims
![Embarassed :oops:](./images/smilies/icon_redface.gif)
I had forgot about the tires too, but the rims didn't male any sense to me
![Neutral :|](./images/smilies/icon_neutral.gif)
Re: RC10 B1.5
Posted: Wed Jan 26, 2011 3:15 am
by ThomasH
Great work, I have never seen anything like it
![Smile :)](./images/smilies/icon_smile.gif)
Re: RC10 B1.5
Posted: Sun May 29, 2011 7:48 pm
by scr8p
i haven't had much time for r/c stuff lately. it should be easing up shortly. but anyways, i've been slowly putting parts on this and figured i'd post some pics.
i still need a couple items for the trans so i can build that, and a couple other misc items. but it's pretty close to completion.
Re: RC10 B1.5
Posted: Mon May 30, 2011 12:08 pm
by m_vice
![Shocked :shock:](./images/smilies/icon_eek.gif)
finally some more photos.
This looks very cool.
Re: RC10 B1.5
Posted: Mon May 30, 2011 3:09 pm
by Charlie don't surf
Better than I thought it would be!!!! Very very cool, like they built it all along!