RC10Talk - The Net's Largest Vintage R/C Community

BattleTrak wrote: ↑Mon Aug 22, 2022 12:57 pm Anyone know what body this is?

AE toyota stadium truck

This is probably a Bolink Round Tracker, but I can't find a pic of a similar battery plate. The steering knuckles are also marked "minicars" which I believe was a Swedish maker that was bought out by Bolink. I know that GoMachV and Dadio worked together on a Digger chassis that looks to use some of the same templates. The knuckles are black while the rest of the nylon is white, so the minicars parts may have just been swapped on.

It just looks like the upper plate has been cut down.

juicedcoupe wrote: ↑Wed Aug 24, 2022 9:13 pm It just looks like the upper plate has been cut down.

That is a probable possibility of course, but I was hoping for something more exotic.

I was hoping the minicar knuckles and skinny front wheels pointed towards something a little more rare.

All the earlier stuff had the minicars logo, that was normal. Same with the zebra parts- they slowly went to black.

Have all sorts of chassis and no idea what they went to. The guy was into dirt oval and it's sadly something I never ran except with converted Losi stadium trucks or buggies
Any ideas on these? I greatly appreciate all the help!

Picked up a few Marui big bears Datsuns along with a bunch of new parts and in a used parts box were these orange connectors. In all my years, I have never seen anything like these. Any idea guys?

I can’t see your pic but orange would be race prep 98% of the time

Oops, my bad. 3mb is a small size... here it is.

Yup those are race prep. Awesome connectors but known for the ability to spark them opposite polarity enough to blow esc’s especially on the first gen style. Later they had a piece to try to prevent this but it was still possible. Even later yet they went to green ones with a ceramic ball to add pressure

LosiRacer1 wrote: ↑Wed Aug 24, 2022 10:14 pm Have all sorts of chassis and no idea what they went to. The guy was into dirt oval and it's sadly something I never ran except with converted Losi stadium trucks or buggies
Any ideas on these? I greatly appreciate all the help!

L to R:

Composite Craft RC10 oval
Composite Craft RC10T ovaL
Trinity Reflex-10 sprint car
Trinity Reflex-10 oval

BillKrueger wrote: ↑Thu Aug 25, 2022 12:20 am 20220824_220544.jpg

I had forgotten all about discharge resistors I used a bunch of tail light bulbs soldered together to give a visually of the battery reaching its discharge point Fun times!

LosiRacer1 wrote: ↑Wed Aug 24, 2022 10:14 pm Have all sorts of chassis and no idea what they went to. The guy was into dirt oval and it's sadly something I never ran except with converted Losi stadium trucks or buggies
Any ideas on these? I greatly appreciate all the help!

Here’s your CC T chassis with a bunch of buggy parts stuck to it

Hi,

Need your help to identify thoses parts












Thank you

Jerome

Some of the parts go for a Demon 1/12 scale