RC10Talk - The Net's Largest Vintage R/C Community

Phin wrote: ↑Thu Oct 28, 2021 6:53 pm Got lucky and found it on the first search. If you don't already do it, using site:rc10talk.com in the Google search terms, and looking through the Images results are both a big help.

I Google "rc10talk". When you do, an additional search bar will show up in the results. It is much better than the search function on the site and allows you to look at images, even some Photo bucket images that can't be viewed here.

Phin wrote: ↑Thu Oct 28, 2021 6:53 pmGot lucky and found it on the first search. If you don't already do it, using site:rc10talk.com in the Google search terms, and looking through the Images results are both a big help.

What is this Google you speak of?

Oh good to know, thank you very much. I can’t tell you how many times I’ve tried to figure out how to word something differently on the site search just to end up being extremely frustrated

MarkyDents wrote: ↑Thu Oct 28, 2021 6:06 pm

Retro rc wrote: ↑Thu Oct 28, 2021 1:44 pm

MarkyDents wrote: ↑Thu Oct 28, 2021 9:07 am Here’s one that is currently listed on eBay, hopefully the owner doesn’t mind me sharing this pic
Not seeing a servo saver hole in this one. 9F55B2C1-BE32-4E66-B8A9-EABDFFC38B00.jpeg

Look closer it’s there under the servo saver

Yea I still don’t see it

I'm pretty sure that is part of the servo saver.

juicedcoupe wrote: ↑Fri Oct 29, 2021 8:16 am I'm pretty sure that is part of the servo saver.

Screenshot_20211029-071353_Gallery.jpg

This is the bottom of the buggy. There is a cutout.

Yeah, but the white piece that he circled looks like part of the servo saver.

Okay, now I see it.
Wow that car is in fantastic condition

Lavigna wrote: ↑Fri Oct 29, 2021 12:14 pm

juicedcoupe wrote: ↑Fri Oct 29, 2021 8:16 am I'm pretty sure that is part of the servo saver.

Screenshot_20211029-071353_Gallery.jpg

This is the bottom of the buggy. There is a cutout.

Very Clean. I'd be bidding on that

This a really special build and I quietly watched as it has progressed with interest as I have many years ago started a build of a Composite Craft Team car and tried to fit it out with as many RPM Team car parts as possible. When I got to the choice of shocks I was never able to make up my mind but maybe one day soon I will get some gumption and finish it.

a01butal wrote: ↑Sat Oct 30, 2021 11:34 am This a really special build and I quietly watched as it has progressed with interest as I have many years ago started a build of a Composite Craft Team car and tried to fit it out with as many RPM Team car parts as possible. When I got to the choice of shocks I was never able to make up my mind but maybe one day soon I will get some gumption and finish it.


IMG_3047.JPG

Very nice ! I’m starting to think the Team Car chassis are more scarce then the worlds cars at this point.

Well, I was fortunate to find this long CC Worlds chassis. Here it is in comparison to my original short chassis. The top plates are identical.

This latest chassis wasn't brand new. It came from a very crusty buggy. I could tell it was free from scratches and damage. However I did discover that several electronics had been epoxied to the chassis. I spent several hours very carefully cleaning and removing goo and epoxy. It's very hard to remove the epoxy without damaging or removing the chassis material. The final result isn't perfect, but once built none of the small flaws should show.

Now I can start this build, again.

Fantastic !!

I got a start this evening. I finally decided on this vintage RPM steering rack. I was torn between A&L, Composite Craft, or Jconcepts steering setups, but I think this will fit well.

Lookin great, what manufacturers hardware are you using ?
I really like their sheen.