RC10Talk - The Net's Largest Vintage R/C Community

looks like there's a crack on the other side.

edit: just noticed the extra scews so that should help.

thanks ill have a better look at the other side .. didnt notce anything while it was off .. might be dirt

might not see it if there's no screw in it.

damn it your right ... ill add a little to that side as well .. i need better eyes

well got out to the wall ride today and didnt finish a heat .. kept braking parts .. first was the rear a arm carrers then the next race i killed a front caster block and she was done as i didnt have a spair one

but i did lead the first lap

this is what the track looks like

http://s114.photobucket.com/user/integra_album/media/rc%20nitro%20truck/103_1896_zps5190394f.mp4.html

havent done much with the car till i find some more andys parts then ill get around to installing the hydra drive ... but till then i installed the teflon shocks

playing around with a light box i made up

so now with me picking up a rc10b4 i retired the rc10 .. i will still have it working incase i want to take it for a spin

i picked up some more parts and felt like building something over the weekend so i got down to it



all the andys parts ive been collecting and finaly installing the hydra drive

so i replaced the cracked front bulkhead and installed the copy front shock tower till i can get the real one and installed the .71 front shocks with 30wt oil and green springs

after i got it back together i tore into the rear and preped the hydra drive for install.. good thing i still had a bottle of hyda drive fluid in the tool box lol





i forgot the size difference



and finaly installed

Love the paint on that rc10!