1/8 eBUGGIES, need opinions

Feel free to discuss anything NON-R/C related that is on your mind.

Moderators: scr8p, klavy69

kaiser
Approved Member
Posts: 2414
Joined: Wed Jun 09, 2010 10:03 am
Been thanked: 5 times

Re: 1/8 eBUGGIES, need opinions

Post by kaiser »

you think thats loud you should hear one with a metal spur.

i always take the whole motor mount out, it's so much easier that way.

my esc wire goes the normal route but instead of going over the center shaft i go under, i also take out the servo/rec box to aid in getting the connector through that tiny hole.

i ran a few laps last night on our track....with my b4, getting psyched for sunday!

i'm running the rc8be, ftb4 (first gen, shorty) and my rc10t. thats right og 10t gonna go beat on some modern trucks!

User avatar
EvolutionRevolution
Approved Member
Posts: 1494
Joined: Tue Feb 01, 2011 3:24 pm
Location: Netherlands
Has thanked: 17 times
Been thanked: 34 times

Re: 1/8 eBUGGIES, need opinions

Post by EvolutionRevolution »

Do those conversion sets include motor mounts that can simply attach to the holes for the nitro motor mounts?

User avatar
Lonestar
Approved Member
Posts: 4270
Joined: Wed Dec 12, 2007 5:17 am
Location: Switzerland, yannow, in Europe (or almost)
Has thanked: 623 times
Been thanked: 170 times

Re: 1/8 eBUGGIES, need opinions

Post by Lonestar »

If that's the place to show off one's BL 8th offroad, here's my MBX6 Eco... just built a few weeks ago, has only been run 3 packs, 2 in the yard one at the track as the weather's SUCKED so far in switzerland!

Image

Image


Leopard 1800kv sensored, SCT Pro 120A, 4S hardcase, KO 2386 servo with top metal case :)
Image

Image

I was supposed to take it to its first race this coming sunday, but the weather aint' very encouraging :( :( :(

Paul
AE RC10 - Made In The Eighties, Loved By The Ladies.
Blue Was Better - now, Blue Is Bankrupt.
Facebook affiliate program manager: "They go out and find the morons for me".
Life is short. Waste it wisely.

kaiser
Approved Member
Posts: 2414
Joined: Wed Jun 09, 2010 10:03 am
Been thanked: 5 times

Re: 1/8 eBUGGIES, need opinions

Post by kaiser »

not the best pic but here's mine with it's stable mate @ motorama:
Attachments
TEAM MOO.JPG

kaiser
Approved Member
Posts: 2414
Joined: Wed Jun 09, 2010 10:03 am
Been thanked: 5 times

Re: 1/8 eBUGGIES, need opinions

Post by kaiser »

EvolutionRevolution wrote:Do those conversion sets include motor mounts that can simply attach to the holes for the nitro motor mounts?
usually, not sure what car you are reffering to but with the rc8's the nitro and electric chassis is the same.

User avatar
Goatless
Approved Member
Posts: 508
Joined: Mon Jan 30, 2012 8:25 pm
Location: Memphis, TN
Been thanked: 2 times

Re: 1/8 eBUGGIES, need opinions

Post by Goatless »

Nice looking buggies guys. I ran Mugen when I raced nitro. I started with a MBX4 XRWorks and then had 3 MBX 5's.
Mugen is the only buggy I will ever run. I miss that car so much!! :?
"I'm like the fat girl at the prom, just glad to be here!!!

Southern Fried Racing : The Sequel

User avatar
flipwils11
Approved Member
Posts: 1905
Joined: Sun Feb 14, 2010 10:30 pm
Location: St Paul, MN
Has thanked: 2 times
Been thanked: 19 times

Re: 1/8 eBUGGIES, need opinions

Post by flipwils11 »

I ran my RC8Be last night for a bit more time in the street to get a feel. Apparently is nose heavy on jumps because I had my first unfortunate upside down crash jumping a curb in front of my house, :( . First scratches on shock tops and front shock tower, oh well.

It's still a loud, angry beast. The speed and turn-in are tremendous just zipping around the street. I want to take it to the not-so local (a bit of a drive for me) 1/8th scale outdoor loose dirt track and try it out.

User avatar
Goatless
Approved Member
Posts: 508
Joined: Mon Jan 30, 2012 8:25 pm
Location: Memphis, TN
Been thanked: 2 times

Re: 1/8 eBUGGIES, need opinions

Post by Goatless »

With 1/8 buggy. 90% is "in air" throttle control. If the ass-end is kicking over, your springs may be too stiff. The throttle plays a HUGE roll in how your car reacts in the air, unlike some of the 1/10 buggies.
"I'm like the fat girl at the prom, just glad to be here!!!

Southern Fried Racing : The Sequel

kaiser
Approved Member
Posts: 2414
Joined: Wed Jun 09, 2010 10:03 am
Been thanked: 5 times

Re: 1/8 eBUGGIES, need opinions

Post by kaiser »

did you get off the throttle over the jump? that will cause a nose dive every time.
do you havb any drag brake dialed into the esc? turn it off if you do.

if you spend some time jumping experiment with applying throttle to lift the nose or braking if the nose goes to high.
with 1/8 buggies you can "fly" them, throttle and brake inputs will greatly change the flight path.

User avatar
flipwils11
Approved Member
Posts: 1905
Joined: Sun Feb 14, 2010 10:30 pm
Location: St Paul, MN
Has thanked: 2 times
Been thanked: 19 times

Re: 1/8 eBUGGIES, need opinions

Post by flipwils11 »

Thanks guys, very helpful. Yes I have drag brake on the RX8 dialed into 4 (out of 13 I think) so I should set it back to 0? I probably did let off the throttle when I hit the curb so that would explain it. Clearly I need to experiment and fine tune my driving for some of these skills I lack such as getting the car prepped for the landing. I've tried mid-air throttle a bit in with my 2wd 1/10 buggy but didn't notice that it made much difference.

I've watched the youtube videos of the ROAR 1/8th electric buggy nationals and it's pretty amazing to watch them come off the jumps and I could tell something was going on when they were airborne because they were too perfectly placed on landings to be an accident.

BTW, the brakes on the thing are incredible, not sure if it's a function of the esc and motor or also the 4wd drivetrain helping to slow the car.

kaiser
Approved Member
Posts: 2414
Joined: Wed Jun 09, 2010 10:03 am
Been thanked: 5 times

Re: 1/8 eBUGGIES, need opinions

Post by kaiser »

turn the drag brake to zero, you don't want it on.

the only time i'd run a db on a 1/8 is if i was running dirt oval, to get a consitant "kick out".

some people actually complain about the rx8 braking, i find it just fine. i have mine turned down some, don't need it to lock up.
but it's the 4wd that really makes it nice for sure.

the mid air throttle is way different on a 4wd 1/8, if you stay on it 100% you'll do back flips.

User avatar
Goatless
Approved Member
Posts: 508
Joined: Mon Jan 30, 2012 8:25 pm
Location: Memphis, TN
Been thanked: 2 times

Re: 1/8 eBUGGIES, need opinions

Post by Goatless »

Kaiser's right. Turn that drag brake off. "Flying" a 1/8 buggy takes skill, but its acquired pretty fast, lol. With the size of some of the jumps this class can handle, you have to be able to control it in the air. 8)
"I'm like the fat girl at the prom, just glad to be here!!!

Southern Fried Racing : The Sequel

User avatar
flipwils11
Approved Member
Posts: 1905
Joined: Sun Feb 14, 2010 10:30 pm
Location: St Paul, MN
Has thanked: 2 times
Been thanked: 19 times

Re: 1/8 eBUGGIES, need opinions

Post by flipwils11 »

Goatless wrote:With the size of some of the jumps this class can handle, you have to be able to control it in the air. 8)
This is one of my favorite videos to watch, it's very inspiring to get the kind of car control (including off the jumps!) that these guys have.

[youtube]UPsQKb4944g[/youtube]

User avatar
Goatless
Approved Member
Posts: 508
Joined: Mon Jan 30, 2012 8:25 pm
Location: Memphis, TN
Been thanked: 2 times

Re: 1/8 eBUGGIES, need opinions

Post by Goatless »

Excellent video in buggy control. Ryan was ballin'!! Notice how they can jump and pitch it in a turn. 8)
"I'm like the fat girl at the prom, just glad to be here!!!

Southern Fried Racing : The Sequel

User avatar
flipwils11
Approved Member
Posts: 1905
Joined: Sun Feb 14, 2010 10:30 pm
Location: St Paul, MN
Has thanked: 2 times
Been thanked: 19 times

Re: 1/8 eBUGGIES, need opinions

Post by flipwils11 »

A couple of vids I posted last night.

[youtube]O6TTfeX07HU[/youtube]

[youtube]dRz69iRQGAs[/youtube]

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post

Return to “Off-Topic / Chit-Chat”

Who is online

Users browsing this forum: No User AvatarDotNetDotCom.org [Bot] and 2 guests