RC10Talk - The Net's Largest Vintage R/C Community

waiting on a few parts. progress

Hi, I'm James, and I wait for parts.....

I'm assuming you have the tranny complete/assembled now?

I'll take those extra parts out of the front end rebuild if you don't need them.....

i will bring them next race .


im waiting on the bushings for the slipper and a 75 spur


hope to have it ready befor the next race

progress. should have track side next sat .


what is the shaft length total for 1.32 shaft rear shocks

should get camberlinks and rear rubber friday night .

Use 1.02 shafts in the 1.32 bodies for the rear, use the .031 shims to adjust down travel from that point.

cool im kinda strugling with the set up the front springs are to long and have preload on them and the rear are to long . ahh and the lid does not fit the chassis its a little to wide

Try using buggy green springs on the front instead of truck springs.

Once you have all the weight in the chassis (motor, battery, speedo...) the rear will settle down quite a bit. Rear springs are the same length for truck and buggy.

im really kinda pushing the build to be done by next sat OCT 24th

there are about 5 of us that are going to run vintage in the buggy class this winter . the b4 is going down.


should be able to check it out live on live rc (thunder rc nashville )

ps brandon you to are going down live baby bahahaha (sorry i had to through in some smack)

i think it is looking good . How do you like that Kimbrough Molded Wing?

I would wait till you get all the electronics on it before changing springs and making any suspension adjustments.
That’s the way the body fits on the graphite chassis, is normal.

The chassis is wider in the front so the body streaches.



the wing is great hope it works as good as it looks

jsrracing wrote:im really kinda pushing the build to be done by next sat OCT 24th

there are about 5 of us that are going to run vintage in the buggy class this winter . the b4 is going down.


should be able to check it out live on live rc (thunder rc nashville )

ps brandon you to are going down live baby bahahaha (sorry i had to through in some smack)

Mine will be on the track tonite!


Where will yours be?

that hurts

mine will be on track too

angony angony

getting close