RC10 XXX worlds ( REVISION & RECHASSIS )

[slotcarrod]

Awesome build, Reg! Are those servo mounts RPM parts as well or custom? They look like AE 7336’s, but I can't recall seeing them in white before.

I had a similar experience with RPM parts that were left soaking for a while, except mine turned green. They were in laundry detergent and some bleach and they turned sort of a glow-in-the-dark green. I thought they were ruined, but I built the car anyway. Eventually, they lost most of the green tint and came out looking pretty good.

I bleached a set of team car rear hubs once, and they turned bright yellow! and after about 2 months of sitting they came back--the gear cover is only a touch darker than the new parts and
it should lighten up after a month or so. And the servo mounts are AE 7336's from an early B2-and
I have one more set left for another build

I did not know the early B2 came with white servo mounts, I thought only the servo arms were white. This is great info!

[Charlie don't surf]

I told you a year ago that mine has white bellcranks too

[ericsp2]

so why the rpm tranny? isnt that the gear ratio for the rc10t to except new faster brushless motors?

[scr8p]

probably because it says RPM on it.

not to mention, a rc10b4 buggy has a 2.60 trans. so, it's not like a 2.65 in a buggy is way off base.

[PBR Allstar]

Really nice build Reg. Glad the RPM Parts cleaned up nice! Did you end up using the small spring isolators? I didn't know if those were an RPM deal or not, I've never seen that style before, but they were on the shocks so I sent them.

[Charlie don't surf]

59burst hooked me up with a Yoke kit with the same isolators and lower spring retainers that were similar to the RPM kit (that I can't seem to find) so I didn't use them, but they are correct for the
quick clips to have that--

[Mikeyboy]

Nice build! Where did you get the idea for the slimmer chassis? Was there a manufacturer who made these?

[fastang]

Nice build! Where did you get the idea for the slimmer chassis? Was there a manufacturer who made these?

Associated made them.

[Mikeyboy]

When did they make the worlds chassis? Was it after the worlds car came out?

[Charlie don't surf]

It was the last chassis right before the B2

[HotRodJosh]

Looks GREAT!
But no car is FINISHED until the body is PAINTED.....

[slotcarrod]

I told you a year ago that mine has white bellcranks too

What!!!! You know what to do if you get an extra set right? If not I will still need pics for the 25 year thread.

[Charlie don't surf]

I told you a year ago that mine has white bellcranks too

What!!!! You know what to do if you get an extra set right? If not I will still need pics for the 25 year thread.

I took the edinger pics, but haven't edited them yet, and I have to go to PA until Friday--have em' to ya when I get back

[scr8p]

reg, are you going to the usow race? i'm not sure if i'll get down there this weekend or not.

[Charlie don't surf]

Got some parts that I have been looking for but now that I have installed them I'm not sure Opinions please!

White wheels with Yokomo 30 wheels TR31-s and the Pro 105's

1 a1 ae1 001.jpg

1 a1 ae1 002.jpg

Or the way it was with the Yellow wheels, the Pro 88's and the Pro 105's

1 rc10 xxx 003.JPG

HELP