RC10Talk - The Net's Largest Vintage R/C Community

Hmm cool, thanks for the link. TMS was one of the companies who's name I couldn't remember when searching.
I had since found these:
http://www.ebay.com/itm/NIP-Vintage-Sees-billet-aluminum-wheels-for-Tamiya-Blackfoot-Mud-Blaster-Beetle-/231649635932?hash=item35ef64ee5c&nma=true&si=uOpwOp58E8lFwTzx1ekMDBGxPbs%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557
They look very similar except are drilled. Apart from the holes they look almost exactly like the TMS wheels in your link.

Anyone know what body is on this Slash? Thanks in advance.

Looks like a home made brake line tuber.

Can anyone help with the ID on these UJ's? It's driving me nuts since they have no pin holes!

teman wrote:Can anyone help with the ID on these UJ's? It's driving me nuts since they have no pin holes!

Looks like some Kyosho Optima/Ultima/Lazer/Triumph UJs.

Jirka

Jirka wrote: Looks like some Kyosho Optima/Ultima/Lazer/Triumph UJs. Jirka

Thank you Sir, much appreciated!

Does anyone have any idea what this body is from? Came with a bundle of parts I bought. I thought it vaguely looked like an AYK body, but I can find nothing that matches exactly.

Parma Chenowth for Monogram Lightning(Thunder) / Yonezawa Wave Hunter.

Second page, first car, fourth row: http://www.tamiyaclub.com/showroom_model.asp?cid=89299

Phin wrote:Parma Chenowth for Monogram Lightning(Thunder) / Yonezawa Wave Hunter.

Second page, first car, fourth row: http://www.tamiyaclub.com/showroom_model.asp?cid=89299

Thanks for that, I'd never have got that in a million years

The indents on the sides with the A in them were a dead give away...they're for holding down the body. As far as I know Parma made the only aftermarket body specifically for those cars.

Phin wrote:The indents on the sides with the A in them were a dead give away...they're for holding down the body. As far as I know Parma made the only aftermarket body specifically for those cars.

Looks A LOT like a PB Mini Mustang body..... a car that was sold by Parma in the US. Maybe a connection?

Alex

Don't know much about the Mini-Mustang's history but I've seen a couple of different body styles on them. I would say at least one was definitely made by Parma though. There's one body where the side windows styling on it is the same as on CAT3K's Monogram body. The Parma RC10 Chenowth had that styling too.

the mini mustang that Alex gave me free of charge has a body that is really close to that. Really the only difference is it looks like netting at the top of the windshield vs. smooth like this one.

Either way its a really cool body

Todd

klavy69 wrote:the mini mustang that Alex gave me free of charge has a body that is really close to that...

You trying to get me lynched, K-man????