Page 3 of 3
Re: buried by the family dog (new v1 gt project)
Posted: Sun Apr 07, 2013 4:21 pm
by DHood
It's just a SG style shaft so many other clutches will work. Some 1/8 scale conversions use the nitro clutch setup as it works as a slipper.
And hurts to see that you are hacking a A-Main conversion to go electric
Re: buried by the family dog (new v1 gt project)
Posted: Sun Apr 07, 2013 4:43 pm
by discgolfer72
no hacking required
everyhing mounts without cutting or modfiying at all
just some longer screws for the tranny to mount the elect motor mount
and 2 holes drilled into the elect motor mount ,to screw it to the tranny brace mounting on the upper chassis plate
and since im missing the rear motor mount made for the a-main chassis (its not the same as a standard gt motor mount)
i have really no choice
Re: buried by the family dog (new v1 gt project)
Posted: Sun Apr 07, 2013 5:10 pm
by justinspeed79
Bleh, I wish someone other than steggun had the t-maxx mount, but I do like the look of it.
Anyone looking for universal motor mounts should look at the Tekno "block"mounts. Was going to get one for ntc3 conversion, but have decided to go in a different direction with that.
Re: buried by the family dog (new v1 gt project)
Posted: Sun Apr 07, 2013 9:34 pm
by esaresky75
justinspeed79 wrote:Bleh, I wish someone other than steggun had the t-maxx mount, but I do like the look of it.
Anyone looking for universal motor mounts should look at the Tekno "block"mounts. Was going to get one for ntc3 conversion, but have decided to go in a different direction with that.
He's not the only one, there are lots of sellers but he is the lowest priced. Type the part number in Goggle, EEC2000T01
Re: buried by the family dog (new v1 gt project)
Posted: Sun Apr 07, 2013 9:57 pm
by justinspeed79
esaresky75 wrote:justinspeed79 wrote:Bleh, I wish someone other than steggun had the t-maxx mount, but I do like the look of it.
Anyone looking for universal motor mounts should look at the Tekno "block"mounts. Was going to get one for ntc3 conversion, but have decided to go in a different direction with that.
He's not the only one, there are lots of sellers but he is the lowest priced. Type the part number in Goggle, EEC2000T01
Cool. Thanks for the heads up.
Re: buried by the family dog (new v1 gt project)
Posted: Mon Apr 08, 2013 5:44 pm
by discgolfer72
another batch of parts in lol just need one more box to arrive and its time to start building
man whoever had these parts needs to slow down on the 420
opened the box and now my shop smells like a used bong
mest have stored his pipe with his rc parts lol
Re: buried by the family dog (new v1 gt project)
Posted: Mon Apr 08, 2013 9:51 pm
by justinspeed79
You didn't buy those from me did you? I can't remember. Where is my pipe anyway.....
