My Kyosho Optima collection

Post by **keithrc** » Sat Apr 20, 2013 8:19 am

Thanks mate, hopefully I'll be able to replicate at least some of your projects oneday.

My original Optima was converted into a Turbo back in the 80's after my younger brother bought one. When I finish off the Turbo project I'll definitely post it up for all to see, might even put some pics of the NIB Turbo up soon.

Keith

Post by **keithrc** » Tue Apr 23, 2013 5:10 am

The postman was very good to me today, thank you very much Mr. postman!

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Keith

Post by **j0pp3** » Tue Apr 23, 2013 5:29 am

Another piece of r/c history in good hands!

What's the plan for it?

Post by **keithrc** » Tue Apr 23, 2013 5:37 am

I'm in two minds about wheather to build it or not, if I do I certainly won't run it. I really need to organise better storage and display set ups for my RC's.

Keith

Post by **j0pp3** » Tue Apr 23, 2013 6:11 am

I know that feeling. I have had a NIB Triumph for 1y 5m now but there has always been other projects on the agenda.

Post by **keithrc** » Tue Apr 23, 2013 7:15 am

It's definitely a tough choice, not because of other projects but because once it's built it's not NIB anymore. Then again, they were meant to be built and driven and enjoyed.

Anyway, I took some pics of my NIB Trubo Optima as well.

Uploaded with ImageShack.us

Uploaded with ImageShack.us

Keith

Post by **j0pp3** » Wed Apr 24, 2013 3:25 am

Ooooh, a piece of my childhood trapped in a box

Post by **keithrc** » Wed Apr 24, 2013 5:01 am

Heh, I could say the same of the Optima and my younger brother could say it of the Turbo. Ahh the memories.

Keith

Post by **keithrc** » Sat May 18, 2013 11:14 pm

OK guys, I've been playing around with Windows Movie Maker and edited a vid of my Optima, check it out. I think it turned out reasonably well for my first attempt.

[youtube]r9LWHxtUsNc[/youtube]

Keith

Post by **Coelacanth** » Sun May 19, 2013 10:49 pm

Nice vid...for a stock Mabuchi can, that Optima ran pretty sharp!

Post by **DennisM** » Mon May 20, 2013 12:36 am

Looks very nice with yellow rims

Post by **keithrc** » Mon May 20, 2013 3:13 am

Thanks guys, I plan on doing more vids soon so I'll post em up when I do. I was happy with how it performed, new battery packs help.

Yea I think the yellow wheels really set it off with the box art type colour sceme. I think blue wheels would suit it well too. I think it needs a rebuild actually, got a couple mods in mind but it'll still keep the stock appearence about it.

I ran the blue Optima too but it was underperforming for some reason, might need a new motor.

Just while I'm posting this, got a couple questions.

1. I'm running a 15T pinion that looks to be the hardened steel type, but none of my allen keys fit it so it must be an imperial size, any ideas?

2. Any suggestions on where to find a replacement foam rubber seal for the motor cover? Most of mine need replacing badly.

Lastly, I received a message from Jon Miller this morning saying my body's (Optima and Optima Pro) were finished so I sent the payment off.

Hopefully they won't take too long to arrive.

Keith

Post by **keithrc** » Tue May 21, 2013 2:37 am

keithrc wrote: Just while I'm posting this, got a couple questions.

1. I'm running a 15T pinion that looks to be the hardened steel type, but none of my allen keys fit it so it must be an imperial size, any ideas?

2. Any suggestions on where to find a replacement foam rubber seal for the motor cover? Most of mine need replacing badly.:

Anyone?

Post by **Coelacanth** » Tue May 21, 2013 2:50 am

keithrc wrote:2. Any suggestions on where to find a replacement foam rubber seal for the motor cover? Most of mine need replacing badly.

Don't try looking for NIP foam strips because the price you'll pay is asinine, and it might be too dried up to be useful anymore. I bought a large roll of door/window weatherstripping foam tape, it's about a half-inch wide and maybe an 1/8" thick, and simply cut thin strips with a scissors.

http://www.homedepot.ca/product/closed-cell-sponge-rubber-tape/941507

One roll should be enough for a thousand cars. Maybe a million.

Post by **j0pp3** » Tue May 21, 2013 3:18 am

keithrc wrote:
1. I'm running a 15T pinion that looks to be the hardened steel type, but none of my allen keys fit it so it must be an imperial size, any ideas?

Keith

I have both metric and imperial keys just because of this. A set with the four most common ones use to be kind of cheap.

Most common keys for metric:
1.5mm
2.0mm
2.5mm
3.0mm

Most common for imperial keys (metric in parentheses for comparison):
0,05 inch (1.27mm)
1/16 inch (1.59mm)
5/64 inch (1.98mm)
3/32 inch (2.38mm)

RC10Talk - The Net's Largest Vintage R/C Community

My Kyosho Optima collection

Re: My Kyosho Optima collection

Re: My Kyosho Optima collection

Re: My Kyosho Optima collection

Re: My Kyosho Optima collection

Re: My Kyosho Optima collection

Re: My Kyosho Optima collection

Re: My Kyosho Optima collection

Re: My Kyosho Optima collection

Re: My Kyosho Optima collection

Re: My Kyosho Optima collection

Re: My Kyosho Optima collection

Re: My Kyosho Optima collection

Re: My Kyosho Optima collection

Re: My Kyosho Optima collection

Re: My Kyosho Optima collection

Create an account or sign in to join the discussion

Create an account

Sign in

Who is online