Re: Vintage RC10 CE / Masami tribute :)
Posted: Sun Nov 20, 2011 6:22 am
Wow! a postmodern RC10 Masami killer! 
RC10Talk - The Net's Largest Vintage R/C Community
Vintage RC10 CE / Masami tribute :)
Page 3 of 5
Re: Vintage RC10 CE / Masami tribute :)
Posted: Mon Nov 21, 2011 7:17 pm
updated pics, almost ready to run...
Re: Vintage RC10 CE / Masami tribute :)
Posted: Mon Nov 21, 2011 7:18 pm
This car is ABSOLUTELY STUNNING! 
GREAT job!!!!!!!
GREAT job!!!!!!!
Re: Vintage RC10 CE / Masami tribute :)
Posted: Tue Nov 22, 2011 12:54 pm
thanks 
i added 10T shocks, chopped front tower, front and rear arms, rear universals, Associated 2.2 wheels dyed, and Losi silver stud tires. id like to have a spare foam sponge set of indentical wheels for the street.
im looking for a few things to finish it up. the motor plate on it right now is spraypainted looking for a stock black plate for a 6 gear trans, or possibly a black Litespeed.
also looking for those white shock collar spacers, not sure the exact name but i need a few for each shock. im assuming they cam stock on 10T's for reason. could use a few stock cream colored body mounts too.
since the 10T arms widen it so much, i made a steering brace out of a front tower, but would like to make a proper one out of the same material, just need some scrap fiberglass about 4 to 5 inches wide.
lastly, im working on a stock motor with custom label, and a hand built 5x2 hump, NiMH battery with Sanyo Cadnica cell labels.
anyway, back to work for me. im putting a few weeks time between RC tinkering and actual work printing, need to catch up...
i added 10T shocks, chopped front tower, front and rear arms, rear universals, Associated 2.2 wheels dyed, and Losi silver stud tires. id like to have a spare foam sponge set of indentical wheels for the street.
im looking for a few things to finish it up. the motor plate on it right now is spraypainted
looking for a stock black plate for a 6 gear trans, or possibly a black Litespeed. also looking for those white shock collar spacers, not sure the exact name but i need a few for each shock. im assuming they cam stock on 10T's for reason. could use a few stock cream colored body mounts too.
since the 10T arms widen it so much, i made a steering brace out of a front tower, but would like to make a proper one out of the same material, just need some scrap fiberglass about 4 to 5 inches wide.
lastly, im working on a stock motor with custom label, and a hand built 5x2 hump, NiMH battery with Sanyo Cadnica cell labels.
anyway, back to work for me. im putting a few weeks time between RC tinkering and actual work printing, need to catch up...
Re: Vintage RC10 CE / Masami tribute :)
Posted: Tue Nov 22, 2011 1:08 pm
Looking good, man! 
I don't think there is a black 6-gear motor mount. The shock spacers, you're looking for Yokomo or RPM.
Love the pics!
I don't think there is a black 6-gear motor mount. The shock spacers, you're looking for Yokomo or RPM.
Love the pics!
Re: Vintage RC10 CE / Masami tribute :)
Posted: Tue Nov 22, 2011 4:06 pm
your very lucky to drive such a stunning buggy, very impressive work mate. love it
Re: Vintage RC10 CE / Masami tribute :)
Posted: Wed Nov 23, 2011 7:52 am
There is actually and it was only available with the TQ10 kits. That being said, you can use a Stealth motor plate for a six-gear trans without any mods, if you want to do the opposite, then you would have to drill one extra hole.Bimdapogs wrote:Looking good, man!
I don't think there is a black 6-gear motor mount.
Re: Vintage RC10 CE / Masami tribute :)
Posted: Thu Nov 24, 2011 5:38 pm
final modication pics, plus tribute B4.1 pics...
Re: Vintage RC10 CE / Masami tribute :)
Posted: Thu Nov 24, 2011 10:44 pm
I like allot! Are you going to sell complete decal sets? How are you able to print the white?
Re: Vintage RC10 CE / Masami tribute :)
Posted: Fri Nov 25, 2011 7:23 am
Stunning good looks! i like it too much...
Re: Vintage RC10 CE / Masami tribute :)
Posted: Fri Nov 25, 2011 10:27 am
Nice looking tribute cars... congrats on a job well done.
congrats on a job well done.Re: Vintage RC10 CE / Masami tribute :)
Posted: Sat Nov 26, 2011 8:37 pm
that tribute b4.1 is freaking awesome!!!
Re: Vintage RC10 CE / Masami tribute :)
Posted: Mon Nov 28, 2011 12:18 am
thanks guys, but really thank Takatani for the design
yep, i can print white, opaque white and light tint white.
i drove the gold pan about a dozen times allready, flipped it twice
it doesnt just turn on a dime, it spins around like a top, thanks to the wide front. im looking to upgrade to a Stealth trans / slipper, and back to gears. its just too quiet with the belt.
yep, i can print white, opaque white and light tint white.
i drove the gold pan about a dozen times allready, flipped it twice
it doesnt just turn on a dime, it spins around like a top, thanks to the wide front. im looking to upgrade to a Stealth trans / slipper, and back to gears. its just too quiet with the belt.
Re: Vintage RC10 CE / Masami tribute :)
Posted: Thu Dec 29, 2011 1:00 pm
New pics, updates...
- Yokomo style wheel effects on B4 2.2 wheels
- hand made shock spacers from nylon tubing
- lower profile stance
Still need a stealth trans to replace blown 6 gear, and would like to get a Litesink heatsink as well.
Happy New Year guys!
- Yokomo style wheel effects on B4 2.2 wheels
- hand made shock spacers from nylon tubing
- lower profile stance
Still need a stealth trans to replace blown 6 gear, and would like to get a Litesink heatsink as well.
Happy New Year guys!
Re: Vintage RC10 CE / Masami tribute :)
Posted: Thu Dec 29, 2011 1:28 pm
That looks great! How does the width with the truck suspension compare to the B4?