RC10Talk - The Net's Largest Vintage R/C Community

That looks good man, cant wait to see more.

Hey did this build use the RPM rear end as well?

Charlie don't surf wrote:Hey did this build use the RPM rear end as well?

I can only afford using RPM rear arms (black color) only.

For the rear bulkhead & arm mounts, just stick to original.

why did you cut off the bottom of the rear bulkhead?? better CG??

tiger1 wrote:why did you cut off the bottom of the rear bulkhead?? better CG??

for easy fitting of the battery only, no need to "squeeze" the stick pad into the tiny little hole.

BTW, I bought the chassis stiffener from Daryl recently, really keen to put it in this project, but after reading Emerson's thread about his Legend 4-10 project........seems that adding the stiffener plus the drive belt on top, the space will be tight..... .......anyone got a solution ??.......thanks !!

http://www.rc10talk.com/viewtopic.php?f=35&t=21876

minimini: I do have an idea that will work

I don't know what topic to ask but I think people can help me out
I have 1 legend 4-10 but NO drive belt, I check with HPI 4mm the teeth perfect fit but too short for it. Does anyone know what size of the belt and how many teeth does it need? very hard to find the mip legend belt only belt I think from HPI. Please help me

I don't have a great answer for you but....

You could take the long hpi belt and route it as it should be, and measure how much too long it is. Subtract that from the length of the long belt and you should have a pretty good approximation. You know the pitch seems ok so just finding a proper length or tooth count is all that is left