Page 200 of 384
Re: So what did you get in the post today ???
Posted: Thu Aug 22, 2019 12:01 am
by GeneralZod
Incredible_Serious wrote: ↑Mon Jul 01, 2019 11:15 pm
Got a large lot of parts in the mail yesterday and today, including Tamiya bodies and a couple of chassis, and boxed but untested ESCs from Futaba and Novak. Along with everything else, this little gem was a welcome bonus! This is a Tamiya Acto-Power TRF-Tuned motor... and I know they must be rare, because I had to look it up to find out what it was!!!
20190702_101518.jpg
20190702_101510.jpg
Certainly, it needs a bit (read: a LOT!) of a clean, but it's rarity alone makes this the needle in the large pile of needles
. As a comparison, a new rotor (armature) for one of these sold recently for almost US$50, and there's a new can up for sale currently, with a price tag over US$80... and that's the only two items I can find on eBay!
Much better day
Alex
That is a rare find indeed! I was always curious how they anodized two colors on the end bell. Must have been expensive to do so. I haven't seen very many of these around. I would like to see it restored.
Re: So what did you get in the post today ???
Posted: Thu Aug 22, 2019 12:12 am
by Incredible_Serious
GeneralZod wrote: ↑Thu Aug 22, 2019 12:01 am
That is a rare find indeed! I was always curious how they anodized two colors on the end bell. Must have been expensive to do so. I haven't seen very many of these around. I would like to see it restored.
In all honesty, I was never going to bring it back to how it should be.... so I threw it back up on eBay on it's own. Did pretty well, too, which was pleasing.
Luckily, the car it came with (Tamiya TA01/02) still proves a great source of parts, as tearing it down showed it had been built with full bearings and an alloy motor mount... expensive upgrades back in the day.
Alex
Re: So what did you get in the post today ???
Posted: Thu Aug 22, 2019 3:07 pm
by XLR8
GeneralZod wrote: ↑Thu Aug 22, 2019 12:01 am
Incredible_Serious wrote: ↑Mon Jul 01, 2019 11:15 pm
Got a large lot of parts in the mail yesterday and today, including Tamiya bodies and a couple of chassis, and boxed but untested ESCs from Futaba and Novak. Along with everything else, this little gem was a welcome bonus! This is a Tamiya Acto-Power TRF-Tuned motor... and I know they must be rare, because I had to look it up to find out what it was!!!
20190702_101518.jpg
20190702_101510.jpg
Certainly, it needs a bit (read: a LOT!) of a clean, but it's rarity alone makes this the needle in the large pile of needles
. As a comparison, a new rotor (armature) for one of these sold recently for almost US$50, and there's a new can up for sale currently, with a price tag over US$80... and that's the only two items I can find on eBay!
Much better day
Alex
That is a rare find indeed! I was always curious how they anodized two colors on the end bell. Must have been expensive to do so. I haven't seen very many of these around. I would like to see it restored.
I agree; that's a pretty cool looking motor. I don't know this for certain but I believe that the end bell is semi-finished on the CNC, then it's anodized and returned to the CNC for a final selective skim cut to expose the bare aluminum. Maybe the finished part is clear anodized - not sure about that. In any event, the two-tone ano is almost certainly a more costly process overall.
Re: So what did you get in the post today ???
Posted: Thu Aug 22, 2019 5:59 pm
by jwscab
Yes the final machining is done post anodizing. I highly doubt it is reanodized after.
Re: So what did you get in the post today ???
Posted: Sat Aug 31, 2019 3:11 pm
by XLR8
Restoration project.
Re: So what did you get in the post today ???
Posted: Thu Sep 05, 2019 2:30 pm
by XLR8
A derelict in need of some tlc.
The road tires are interesting - never had them before. I want to build something to run around the church parking lot.
Re: So what did you get in the post today ???
Posted: Thu Sep 05, 2019 3:09 pm
by Lonestar
new 'puter
Re: So what did you get in the post today ???
Posted: Wed Sep 11, 2019 1:24 pm
by limestang
I got this today, but it shrunk in the mail.
Re: So what did you get in the post today ???
Posted: Thu Sep 12, 2019 10:11 am
by Lonestar
limestang wrote: ↑Wed Sep 11, 2019 1:24 pm
I got this today, but it shrunk in the mail.
What is this?!
Re: So what did you get in the post today ???
Posted: Thu Sep 12, 2019 11:35 pm
by limestang
Lonestar wrote: ↑Thu Sep 12, 2019 10:11 am
limestang wrote: ↑Wed Sep 11, 2019 1:24 pm
I got this today, but it shrunk in the mail.
What is this?!
It’s the graphite parts for a 1/32 scale RC10. I posted a few months back a miniature RC10 created by Nigel - search NRC-32. Nigel did an amazing job designing and building this fully function 32 scale RC10 replica. It’s an awesome project. I have been collecting parts to make one. Fibre-lyte still makes the chassis, shapeways many of the plastic items, Other parts come from the Losi Micro-t. I hope to post the build in the coming weeks.
http://vintagerccars.com/first-look-nrc32-132-rc10-replica/
-Limestang
Re: So what did you get in the post today ???
Posted: Thu Sep 12, 2019 11:47 pm
by GoMachV
Hey Mark, I heard a rumor there is a cheap knockoff of the micro T now. Seen it? Search LT832T on AliExpress....around $28!
Re: So what did you get in the post today ???
Posted: Fri Sep 13, 2019 1:56 am
by JK Racing
Got an email that the AE ebay store had Losi BK Bars for Truck in Pink (clay) compound for $5 a pair.
I bought them all....LOL.
Re: So what did you get in the post today ???
Posted: Fri Sep 13, 2019 3:51 am
by Lonestar
limestang wrote: ↑Thu Sep 12, 2019 11:35 pm
Lonestar wrote: ↑Thu Sep 12, 2019 10:11 am
limestang wrote: ↑Wed Sep 11, 2019 1:24 pm
I got this today, but it shrunk in the mail.
What is this?!
It’s the graphite parts for a 1/32 scale RC10. I posted a few months back a miniature RC10 created by Nigel - search NRC-32. Nigel did an amazing job designing and building this fully function 32 scale RC10 replica. It’s an awesome project. I have been collecting parts to make one. Fibre-lyte still makes the chassis, shapeways many of the plastic items, Other parts come from the Losi Micro-t. I hope to post the build in the coming weeks.
http://vintagerccars.com/first-look-nrc32-132-rc10-replica/
-Limestang
cheers - that's awesome!
Re: So what did you get in the post today ???
Posted: Sat Sep 14, 2019 12:27 pm
by XLR8
"I hope to post the build in the coming weeks."
-Limestang
That's awesome! Definitely looking forward to your build!!
Anyway, my stickers have arrived today from MCI.
This is interesting -- I've not seen this before.
I trust they didn't find any Mexicans or explosives -- or exploding Mexicans...
But seriously, everything looks fine - they're doing their job.
Re: So what did you get in the post today ???
Posted: Tue Sep 24, 2019 1:37 pm
by XLR8
Received this body and wing from Penguin today
He shipped it in a "Squashies" gum box so, of course, the postman squashed it.
Fortunately, everything appears to be okay