RC10Talk - The Net's Largest Vintage R/C Community

Phin wrote:Black ones are MRP Pro-110.

Cool thanks..

Incredible_Serious wrote:This is the chassis from my recent pickup Ultima.... can anybody identify who made it? I've marked the extra holes with a red dot.....

Both.JPG

Kickup.JPG

Kyosho is not my strong point.... so any help will make it easier to advertise

Alex

Original Ultima pro xl chassis

Asso_man! wrote:

Incredible_Serious wrote:This is the chassis from my recent pickup Ultima.... can anybody identify who made it?

Original Ultima pro xl chassis

Thankyou sir.... now to find a body, then get it listed!

Alex

Dampeners from early Tamiya F1s (Road wizard), Were these hop ups/ aftermarket. They seem to be a good deal shorter than the stock yellow ones. The king pin on the Road Wizard is mounted a bit more forward for these to work. Can anyone shed some light?

njdriver04 wrote:Dampeners from early Tamiya F1s (Road wizard), Were these hop ups/ aftermarket. They seem to be a good deal shorter than the stock yellow ones. The king pin on the Road Wizard is mounted a bit more forward for these to work. Can anyone shed some light?

Those are the originals. Mine came with those also.

Some 1/12 aluminium wheels. I have no clue what car is using such wheels, someone have seen before?

V12 wrote:Some 1/12 aluminium wheels. I have no clue what car is using such wheels, someone have seen before?

Does the fronts also use grub screws for mounting?

No, just the rear wheels.
The front wheels have something like 3mm or 1/8" hole for wheelaxle. No bushings or bearings.

Heres a very cool tire that I recently bought from mrlexan. I actually got 4 of them. Anyways, they are duratrax and fit 2.0 rim. I would like to know what they are called, possibly a part number,, but most importantly,, I need the ID of its matching rear counterpart! I want to get the rears,, and basically build up a car around these tires. They are so cool looking!

I used to run those tires in dirt oval (under the JG brand), but dont ever remember seeing a matching rear tire.

O/K, so JG... new keyword to search!

I'm going to go with Duratrax DTXC5040 for the front, and DTXC5140 for the rear...

Alex

I actually found this yesterday to scan up.....
Alex

some duratrax tire scans are in the scan archives too....

http://www.rc10talk.com/viewtopic.php?f=82&t=7817

No Alex, IMO it looks a bit different from the 5040, but very close. They were really narrow, I think 0.75in and the knobs on them look (keyword) smaller. I had a bunch of the 5040s at one time. Pictured below.

I don't know it hard to tell. You might be right.