RC10Talk - The Net's Largest Vintage R/C Community

Guts and a stealth case to stuff them in.

This was a Christmas present to myself.... a pile of very rare Schumacher parts!

For my Nitro 4x4 project:
- U1295Q Hi Torque Drive Belt - 7mm
- U1322E Long Drive Belt 324 x 4mm N4x4

For my Daytona projects:
- 2 x U1316L Corner Brackets and 'O' Rings

For my Cougar, Storm / Shotgun, and Nitro 10 projects:
- 2 x U815K Twin Bearing Mod 2WD Front Wheels
- 2 x U820P Ballraced Steering Lever - 2WD
- 2 x U832B Wing Mount Kits




I've been looking for these drive belts for nearly a decade now... very pleased!

Alex

Nice feeling you get when that long elusive search is sitting in your hands, Good on ya Alex.

I bought two of these, one for storage and the other to use. Might give one to my son, or sell it at cost to a friend here in Calgary.

I have been telling everyone,

I am waiting on a empty cardboard box from the U.S,

and I couldn't be happier.

Boy, I've got some puzzled looks!

Received this last week:
Kyosho Impress F-1 wreck, has alloy motor mount, half an alloy t-bar mount set, and NIB alloy gear diff, also a carbon main chassis with a bunch of extra holes, front wing more or less intact, but front suspension with clear signs of a severe frontal impact and a broken top deck.

Also got this:
Kyosho Impress rear wing, front suspension parts, and FJW-20 suspension conversion set to convert the stock chassis into a link car similar to the Cross Fireforce (which is the descendant of this chassis).

And also got this:
Kyosho KX-One/TF-4/misc parts lot, which means I've finally got one of the few remaining KX-One options (alloy wheel hexes) and enough spares for hopping up another few chassis.

And another box containing various bits today:
- NIP Alex Racing Design Barracuda R2 threaded shock bodies x3 + Barracuda R1 shock bodies x1, in four different colors, meaning I haven't got a full set of bodies in one color, but since my ARD Barracuda is a mix of R1 and R2 parts in two shades of blue anyway...
- NIP ARD Barracuda R2 arms x2, ball diff spur x3, swing bar holder x1, c-hubs + front uprights x2, one-way spur x1, steering posts x1, ball diff springs x1, ball diff nut x1, 4.3 mm ball mounts x1, Barracuda R3 sliding steering rack x1, steering posts x1.
- Some loose Barracuda suspension parts, carbon axle (purple) + a delrin diff conversion
- Yokomo MR-4 TC rebuildable CVDs
- Various suspension springs and other parts, spurs, screws etc.
- Team Atlas cardboard box.
- A box filled with various alloy and plastic parts, amongst others 6 universals, various aluminium axles, diff outdrives, many ball cups in all kind of sizes, 4 alloy shocks (1 probably Yokomo, 1 Tobee Craft, 2 not entirely sure), lots of plastic shock parts and some springs, tons of alloy hexes for touring cars (and 2 delrin ones), at least 20 pinions, several alloy stand-offs, a Lazer motor spacer, 5 alloy body posts, a dozen or so foam washers to put between a body mount and body, many servo mounts including four or so alloy sets, and some pretty rare options for the descendant of the Kyosho Impress F1 shown in the previous post.

Some GoMachV towers for my B6D...

Nice little lot in the mail today.....

Firstly, some decals and a manual:

- Tamiya M02 Renault Alpine instruction manual
- Tamiya Mini JCW Coupe decals and window masks
- Tamiya VW Scirocco GT24 decals and window masks
- ABC Hobby Datsun Sunny Coupe decals and window masks
- A sheet of carbon / graphite decal.

Some odd-bod electrics:

- Speed Passion Exige brushless ESC with a brushless "Sport Tuned JR" motor
- LRP Quantum super-tiny brushed ESC
- Tamiya Sport Tuned motor
- Tamiya 1700MP 'shorty' NiCd pack
- Kyosho RS-V MIni ESC / Servo / Receiver combo (75MHz, unfortunately )

And, a nice Tamiya transmitter bag!


Alex

I found a hen's tooth today that will go along my early RC12E

Delta IFS

Still available from Dave at Delta

This will go on the front of my PB Sizzler back half

Hot Laps TR-8 M's, as per the Yokomo 870c kit. I never thought i'd actually manage to find a pair


To go with these:-

Box full of black 10t t2 arms front and rear and box mostly used wheels an tires and a radio shack 4 wheeler which i gave to a neighbors kid.DON

Got a big mystery box of new wheels and tyres in yesterday....


Highlights:
- Two pairs of Associated TQ-71 front tyres (one pristine in Dawn Trading pack, one new but with sticker residue on the tyres)
- Two pairs of Eagle TF-9 front tyres
- A pair of Rally Hawgs front tyres
- Pair of Eagle Schumacher Cat copy front spikes
- Pair of unbranded 4-row rear spike tyres, with Aussie store Vagg's Hobbies packaging


Pretty happy with this lot!!!

Alex

Well I was looking for a Jerobee cheetah and found one on eBay in a lot of 5 Jerobee cars! I really don't need 5 and probably will sell a few off.

More vintage parts in the mail!!!!!

Schumacher parts:


AYK parts:


Tamiya, RPM, Associated, RCH parts:


Pleased!

Alex