RC10Talk - The Net's Largest Vintage R/C Community

everything is on the right place now. no broken part any more!

I could never get my hands ona pavidis so I settled on a project I had for a couple years..Recently got some carbon towers and a few other option parts, pavidis rear arms and some Team Suzuki parts...Only problem with my build is the top deck which is from fibre lite..I have an opton top deck with the shock, but it will not fit...rear holes are off? I really wanted to put that top deck on..Pretty rare was NIP..still have a little work to do to it, like replace the screw and rebuild the shocks, and also looking for carbon battery straps

I had a same optional top deck with the shock before. but your rear half is weird. that should be shorter than yours.
and, you can order another top deck with the original Pavidis design from FL. let me know if they don't have the template

and, I'm looking for the top deck with the shock. can you sell it to me if you don't need it? I can modify it.

phoenix is selling some YZ10 pars. you can find the battery plates from him
you can access to BST area after you make 2 more posts
http://www.rc10talk.com/viewtopic.php?f=52&t=909

and phoenix's selling thread
http://www.rc10talk.com/viewtopic.php?f=6&t=17303

59burst wrote:phoenix is selling some YZ10 pars. you can find the battery plates from him
you can access to BST area after you make 2 more posts
http://www.rc10talk.com/viewtopic.php?f=52&t=909

and phoenix's selling thread
http://www.rc10talk.com/viewtopic.php?f=6&t=17303

Was going to say that Phoenix has a Fibrelyte/Com Com top deck in his for-sale thread for the YZ-10, it has the extra bit that covers the layshaft.

That one you have HM is weird - almost looks like the rear part is actually the front deck for a YR4 or something??

To Hairymuffin,

The reason the rear part of the 2 piece top deck does not fit is because the top deck is upside down. This option top deck was designed for the Pavidis Edition Yokomo (your model is the 1994 YZ10) and the Pavidis Edition chassis has one of the top deck posts mounted further forward compared to the 94 YZ10.

You would have to drill 1 new hole if you are planning on using the 2 piece top deck.

Vin

DerbyDan wrote: That one you have HM is weird - almost looks like the rear part is actually the front deck for a YR4 or something??

do you mean the rear camber mount?

Dual wrote:To Hairymuffin,

The reason the rear part of the 2 piece top deck does not fit is because the top deck is upside down. This option top deck was designed for the Pavidis Edition Yokomo (your model is the 1994 YZ10) and the Pavidis Edition chassis has one of the top deck posts mounted further forward compared to the 94 YZ10.

You would have to drill 1 new hole if you are planning on using the 2 piece top deck.

Vin

Dual, thank you so much..I have had this piece for a couple years..I sold 2 in the past as some of you remember it got up to about $100 to my surprise... Not sure if I want to part with it just yet

59burst wrote:

DerbyDan wrote: That one you have HM is weird - almost looks like the rear part is actually the front deck for a YR4 or something??

do you mean the rear camber mount?

I dunno really, a wild stab in the dark - up until recieving my WCS car a couple of months ago I wasn't that familar with any of the Yokomo cars, though I'm learning fast

just got this slow motion from the track owner. and I put the title and my picture on this video

[youtube]jupFgLqiDuc[/youtube]

Cool little Vid..... bizarre looking track!

yeh, it's a funny track which was built for rally cars. and the black big pipes at each corner makes me annoyed. but it's the only place for running old buggies. most EP tracks were closed here. and they run 1:8th buggies these days even they put brushless motors and Lipo batteries on them

where you get all details????
tell site pls!!!!!!

I'm not sure what information you need
did you check the manual?
and, why don't you try google traslation or bable fish? I was told online transaltions are very usuful these days

hairymuffin wrote:I could never get my hands ona pavidis so I settled on a project I had for a couple years..Recently got some carbon towers and a few other option parts, pavidis rear arms and some Team Suzuki parts...Only problem with my build is the top deck which is from fibre lite..I have an opton top deck with the shock, but it will not fit...rear holes are off? I really wanted to put that top deck on..Pretty rare was NIP..still have a little work to do to it, like replace the screw and rebuild the shocks, and also looking for carbon battery straps

the buggy is looking good hm! glad i could help with those shock towers brother!!