RC10Talk - The Net's Largest Vintage R/C Community

is it the width of a battery or a servo?

I'm thinking it goes over a servo myself.

Too narrow to fit over a battery or servo? The opening is 1 1/2 inches.

smaller servo's are 1.5 - check to see if the screw holes line up for the smaller steering servo pan mounts.

Possible Delta? What model?

Looks like (what I was told) my old 800SJ, here: http://www.rc10talk.com/viewtopic.php?f=33&t=31823

I did see that. While it looks very similar the chassis is different and its missing the blocks under the steering rack thing. Could very well be missing of changed though.

Yes it is a late CK800 but some wrong screws, front body posts and tierods. Also wrong position of frontend and servosaver and additional holes at the front. Servosaver might be different part but difficult to tell from the pictures. Black servo plate at the radio plate is not Delta, looks like a Cook plate. Steering blocks are usually red colour, but these are black what maybe means this is a Cook Super-J so last version of the CK800.

The missing plates below the front end beam had been used for adjusting castor. 2°, 4° and 0° plates were used.

Is this your car?

Yes I just purchased it. My intentions were to clean it up, identify it so I can research and possibly source some parts to get it in a little better shape. I plan on selling in the future but want to get it looking better first. I don't like selling junk.

Here's a new shock tower I got with a bunch of other stuff. It says A&L on the back of the tag but not what car it's for. Anyone?

rc10gt i believe

OK, thanks!

scr8p wrote:rc10gt i believe

Can confirm it's for an RC10GT. I've got one NIP too.

Any info on these?
Scale is 1:12.

tomolupus wrote:Any info on these?
Scale is 1:12.

I found out myself they are AYK wheels.