The Official "What is it?" Thread

[j-sou]

The S&K ESC - relabelled M-Troniks?

Doh, just realized I kept calling it the receiver. I'm not THAT dumb. I promise.

[farmer]

well i was going through one of my boxes and i came across some unknowns
thx farmer

[farmer]

some more
thx farmer

[farmer]

and than these
thx farmer

[GoMachV]

1) big brute/usa1 series rear case
2) big brute series front case/bulkhead (2wd)

4) losi jrx2/t diff for 5 gear trans. Ill take it if its not melted
7) looks like a tamiya front tranny but bronze bushings rules that out. Maybe royal ripper or mrc road winner (I will look!)
8 )kyosho optima mid
9) Tamiya fox
10) traxxas ummmmm....a few of em
11) tamiya falcon battery holder


14) I think the unit is a slipper for a tamiya dyno storm iirc
15) tamiya SRB axles (rough rider, super champ, etc)
17) front wheel shaft for big brute 2wd series

[highwayracer]

6. A&l parts. 3 pegs and black brace are for the leathal weapon...possibily the pulleys also. The discs look like mip spur adapters.
7. Front gearbox for a monogram tornado
8. Optimal mid rear gearbox
13. Astute / king cab diff half
15. Long and short shafts are for the optima mid (top and middle shaft)

[GoMachV]

Ahhh tornado....I have one if those here. I was thinking road winner but they have different cases.

[prp]

3 & 16 Plate from Marui Super Wheelie Transmission
7 Varicom Hirobo Transmission

[Mr. ED]

6. A&l parts. 3 pegs and black brace are for the leathal weapon...possibily the pulleys also. The discs look like mip spur adapters.
...

The 3 white parts on the left are the spur adapters for the lethal weapon without slipper. The black partin the bottom center is the top brace and the 2 GF10 plates on the right are the templates for drilling the extra holes in your chassis (universal for different models)

[Coelacanth]

Guys, it's my turn for a "WTFizit" post. I received this assortment of belt-cogged gears & belts with a bunch of Kyosho parts cars, but I have no idea what it's for. None of the cars of the era I'm familiar with ever used these, but they look like what I've seen on more recent cars with belt drives. What are they for? And if you're interested in them, PM me because I have no use for them.

[JK Racing]

hyperdrive pulleys & belts....RC10 and other trannies that use a similar type spur gear

[Mr. ED]

I wrote tooo much to answer first
Hyperdrive spurs and belts. Plenty of application examples around on the board.

I have a bunch myself: I was wanting to use them use them as 4th gear on a midmoter buggy with a reversed 3 gear transmission. But the only time I ran them the pinion ate the belt teeth in the second qualifier.

Going from appearance and my experience I would guess the size of spurs you have is best suited for a 1/10 pancar or oval.
You'd need the correct pinions still, and preferably large ones: the smaller you go the more likely they'll eat the belt.

[Coelacanth]

Thanks guys, I don't plan on using them. The gears range from 58T to 74T in 2-tooth increments except missing 68 & 70. Belts (if I read the numbers correctly) range from 67 to 85.

[tuna.Rc]

Can some one ID these . It kinda looks like the hot trick nose plate looks to be almost rc10. The control arms are un used Andy's,no idea what they are for.
Cant list these on ebay w/o knowing what they are
Any idea's are greatly appreciated

[GoMachV]

Nose looks like hot trick for ultima

Arms look like andys for ultima possibly. We're these pieces together when u got em?