The Official "What is it?" Thread

[Lowgear]

Got a link to the wheels on amain?

These are them right?
http://www.amainhobbies.com/product_info.php/cPath/1_25_1471_913/products_id/140765/n/NewAge-Aluminum-Bead-Lock-Wheel-w-Bead-Lock-Caps-1

[RedScampi]

Red Scampi this is the rest of the original yellow chain/pack support, he's really light...

Thanks, I figured it was something like that. Where does it fit on the car?

[jwscab]

I picked these up on ebay and it stated it was HPI cvd's and spindles, and hub carriers. I have not been able to identify what model they actually came from, and I'm thinking they might be kyosho.......they are short, as designed for a 190/200mm chassis, which, I can't say for sure. for comparison, there is a yokomo 870c magnesium hub. the hub height has been shaved down to fit in a yokomo hub, so they were taller originally.

anybody recognize where they might be from? I can also get a pick of the c-hub too....the c- hubs had a ball end with a philips head in the top, kind of like a traxxas ball end, so don't know if that is relevant.

the axles and hubs use a 5x10 unflanged bearing. the bearings have a dark red/purple seal on them.

[purpletimbo]

Wow, can they really make and sell a CNC real alloy wheel for $7, I reckon the screws must set you back $2 separately?

[bansheesho]

Old school Predator. But I have no clue what model. Some say XK98 and some say a mutt. Anyone want to take a guess? I`ve been out of the game for a long time, what is the deal with this car?

[tim.sanderson]

Those are pretty wild looking cars. I've never raced one, (or even seen one raced for that matter) but from what I hear, they are notoriously hard to get to run right. (or even stay in one piece) But when they do run right, apparently they're unstoppable.

[bansheesho]

I've heard the same thing... Still debating on keeping it or not. I don't think it would be a good 1st car for my son to putt around the local park.

[airdreams1]

jwscab: They could posibly be for a Losi or tamiya too. I had some of the carriers in a lot of stuff I bought, but threw them out since I didnt know what they fit & didnt have all the pices. (guy I got them from only had Tamiya, Traxxas, Losi & kyosho cars. no other brands.)

Anyone know what this car is?????
http://www.rcgroups.com/forums/attachment.php?attachmentid=3595649
Im thinking Kyosho, but dont know for sure..... any info would be appriciated.

[Lonestar]

jwscab: They could posibly be for a Losi or tamiya too. I had some of the carriers in a lot of stuff I bought, but threw them out since I didnt know what they fit & didnt have all the pices. (guy I got them from only had Tamiya, Traxxas, Losi & kyosho cars. no other brands.)

Anyone know what this car is?????
http://www.rcgroups.com/forums/attachment.php?attachmentid=3595649
Im thinking Kyosho, but dont know for sure..... any info would be appriciated.

This is a Robbe Pantera

Paul

[pattywagon34]

got a bunch of "stuff" sitting , dont know what it is. maybe some one here can identify this .

looks to be associated?

no idea (im thinking it came from a nitro, i have a trans/bulk head that has a brake set up)

i was told these are MIP 4wd rc10 transmission cases.. not for sure.

[drbelleville]

the pan car is an RC12L from Associated with "Delta" front end on it, and it may have a composite craft main chassis.

[m_vice]

What is this little guy?

[minimini]

What is this little guy?

this is the Porsche 956 by Tamiya........

[DHood]

The trans cases and aluminum parts are from a A-main nitro conversion for the RC10T.

[pattywagon34]

The trans cases and aluminum parts are from a A-main nitro conversion for the RC10T.

REALY? do you have pictures of how this is set up? i think ill try and do something with these parts after all