RC10Talk - The Net's Largest Vintage R/C Community

This is not particularly exciting....
...but I'm glad to have found one.

Finally found the matching front wheels. I was stoked and already mounted them to the matching tires!
Can't decide if I should white letter the tires...

j-sou wrote:Can't decide if I should white letter the tires...

Yellow letter the tires to match the wheels....

Just got my new to me, Losi XX-CR. My first XX! Some of you probably saw it around on eBay. I made the seller an offer and the rest is history. Its in pretty good shape really, other than a bit dirty. I already cleaned it some and swapped out the rear truck tires prior to the photo op.

Received two lots:

Lot #1 is mostly Kyosho Super10 FW-04 and GP Spider parts, with some Tamiya thrown in: Notable stuff includes alloy front uprights, 1 3/4 sets of FW-04 CVDs, hard suspension arms, and loads of FW-04 2-speed spurs.

Lot #2 is a Kyosho TF-3 with Team Atlas chassis conversion: The car is mostly Team Atlas parts, alloy uprights, c-hubs, delrin arms, shocks, diffs, universals, carbon parts, bumpers, hinge pin holders. The big surprise were the two small boxes. Full set of Team Atlas hinge pin holders (#2), 3/4 set of Kyosho hard hinge pin holders, 2x SPW-33, Team Atlas front one-way #2, unknown alloy C-hubs, Kyosho alloy center mount, misc. carbon bits, hard suspension arms, Kose steering set, ball diff x2, Cross front uprights and c-hubs, tons of Kyosho spares. Suddenly I feel quite a bit less bothered by the 150 bucks I paid for the lot...

So after going through all of the parts, the two lots that I bought to complete two projects (FW-04 and TF-4 conversion) likely have enough parts to complete at least 4 more projects. Just the little cardboard box contains enough option parts to cover the price of both lots

Shouldn't have to worry about using the cheap Chinese screws anytime soon!

I've been busy the last month. The Mud Blaster, The Frog and bottom Bullhead (rere) are NIB kits. The original Bullhead is in near mint condition but the rest need a lot of work! Should be a busy winter!

huuummm

who has had that feeling when you get a order of parts and none of them are the right ones !!!

oh well, was only 10 bucks

ed

Picked up my painted body for the T2 (awesome), and snagged a couple ROAR approved blinky speedos - both for $75 to my door. My son's cars can move again since dad keeps borrowing his electronics

Cool logo Joey! Where did you get the esc's from, link? Need some cheap ones for bashers.

Hobbyking, search trackstar & roar

Klein midget plate and motor plate.
Mccallister SS Camaro body

Johnboy72 wrote:Klein midget plate and motor plate.

Hey me too! Hahaha still don't know WHY I needed it but for the price...why not!