Page 11 of 355
Re: The Official "What is it?" Thread
Posted: Thu Oct 28, 2010 6:05 pm
by purpletimbo
Any further info, are they still around Berg?
Re: The Official "What is it?" Thread
Posted: Fri Oct 29, 2010 6:19 am
by Mr. ED
I think Berg is modern company that does crawler stuff, not?
Re: The Official "What is it?" Thread
Posted: Fri Oct 29, 2010 8:06 am
by Lowgear
I found this as the website:
http://www.mayhemengineering.com If so it doesn't look like anything they make.
Re: The Official "What is it?" Thread
Posted: Fri Oct 29, 2010 9:14 am
by purpletimbo
I have never seen CNC 3 spoke beadlocks before I must admit
Re: The Official "What is it?" Thread
Posted: Fri Oct 29, 2010 9:22 am
by drbelleville
purpletimbo wrote:I have never seen CNC 3 spoke beadlocks before I must admit
Here they are on the Berg (new-age) you can also see them at stormer on the 2.2 Berg Crawler.
better pic here, but there used to be an all plain aluminum version.
http://nullmind.com/tag/berg/
Re: The Official "What is it?" Thread
Posted: Fri Oct 29, 2010 10:02 am
by purpletimbo
That's them down to the slots in the spokes at front,6 screws and circular holes where the hexes were machined on the back

Re: The Official "What is it?" Thread
Posted: Fri Oct 29, 2010 12:22 pm
by Lowgear
Veeeery interesting.
Re: The Official "What is it?" Thread
Posted: Sat Oct 30, 2010 12:10 pm
by losiXXXman
Vintage88 put this up, but id not get a fullly positive ID on it, so I'm putting it up again. The holes in the rear line up with an Ultima bulkhead, but there are two problems. The tab is to short to then mount the rear suspension mount and the tranny. Also, there are no other holes back there. Could this actually be a Frog/Blackfoot Hot Trick Chassis?? Or maybe Hot shot?? The front end has three holes for a front end plate. I think that was typical of the Hot Tricks Right? ANY help would be much appreciated!!!
Re: The Official "What is it?" Thread
Posted: Sat Oct 30, 2010 12:47 pm
by vintage88
yes i would still like to know also and thanks again wes i hope you build something cool with that mystery chassis
Re: The Official "What is it?" Thread
Posted: Sat Oct 30, 2010 1:39 pm
by losiXXXman
got it...
ITS A FROG/BLACKFOOT!!!
Re: The Official "What is it?" Thread
Posted: Mon Nov 01, 2010 11:58 pm
by airdreams1
thats cool. I love to find one....
Re: The Official "What is it?" Thread
Posted: Tue Nov 02, 2010 11:44 am
by drbelleville
drbelleville wrote:purpletimbo wrote:I have never seen CNC 3 spoke beadlocks before I must admit
Here they are on the Berg (new-age) you can also see them at stormer on the 2.2 Berg Crawler.
better pic here, but there used to be an all plain aluminum version.
http://nullmind.com/tag/berg/
Just FYI the Berg 2.2 is on clearance at A-main as are the wheels.
Re: The Official "What is it?" Thread
Posted: Tue Nov 02, 2010 2:22 pm
by RedScampi
Ok, here's little one: This was included with an 834B Dogfighter that I bought but I can't find it anywhere on the instruction sheet. Looks like some kind of chain guide but I have no idea where it fits.
Re: The Official "What is it?" Thread
Posted: Tue Nov 02, 2010 4:55 pm
by purpletimbo
Got a link to the wheels on amain?
Re: The Official "What is it?" Thread
Posted: Tue Nov 02, 2010 6:13 pm
by prp
Red Scampi this is the rest of the original yellow chain/pack support, he's really light...