Ooops
Posted: Tue Feb 06, 2007 4:53 am
Hi guys,
Sorry about that, I probably should have written that better.
Ed
Sorry about that, I probably should have written that better.
Ed
RC10Talk - The Net's Largest Vintage R/C Community
MIP 4x4 Ad and Part List
Page 2 of 2
Re: MIP 4x4 Ad and Part List
Posted: Wed Nov 12, 2008 3:32 am
Does a good soul have a complete instruction manual for the old SP-2 4x4 MIP kit? I am mainly missing one or two sheets with the drawings explaining how to drill the rear bulkhead etc. Pretty please?
Re: MIP 4x4 Ad and Part List
Posted: Thu Nov 13, 2008 1:19 pm
I can't beleive nobody here has at least a copy of the complete manual 
Re: MIP 4x4 Ad and Part List
Posted: Sun Nov 16, 2008 8:24 am
david, are you talking about notching it out for the chain/belt to go through?
Re: MIP 4x4 Ad and Part List
Posted: Sun Nov 16, 2008 9:14 am
yup, mainly, it seems I am actually missing the instruction sheet with the notching of the rear shock tower and a few other drawings... I'm sure either Erik, shodog, kenooze or Daz have the complete manual, they just have to read this post I guessscr8p wrote:david, are you talking about notching it out for the chain/belt to go through?
Re: MIP 4x4 Ad and Part List
Posted: Sun Nov 16, 2008 9:39 am
jay posted the instructions for the legends kit, which shows how to do the alterations to the bulkhead. but, i don't know if it the same for the sp2 kit.
http://www.rc10talk.com/viewtopic.php?f=7&t=586
http://www.rc10talk.com/viewtopic.php?f=7&t=586
Re: MIP 4x4 Ad and Part List
Posted: Sun Nov 16, 2008 9:52 am
I have that manual, but I think the notching is a bit different because the pulleys (mippets) are not exactly in the same place and requires two notches for the chain whereas the belt needs only one big slot...scr8p wrote:jay posted the instructions for the legends kit, which shows how to do the alterations to the bulkhead. but, i don't know if it the same for the sp2 kit.
http://www.rc10talk.com/viewtopic.php?f=7&t=586
Re: MIP 4x4 Ad and Part List
Posted: Sun Nov 16, 2008 10:06 am
i was kinda thinking that, too.Asso_man! wrote:I have that manual, but I think the notching is a bit different because the pulleys (mippets) are not exactly in the same place and requires two notches for the chain whereas the belt needs only one big slot...
Re:
Posted: Fri Feb 25, 2011 3:06 pm
It would appear that it did!mrlexan wrote:Looks like Ed was right (well kinda/sorta)..... if you read the above (the first post), it states you could purchase a belt drive replacement kit for the chain. I have not been able to determine that the belt drive was available in complete kit form prior to the Legends kit.
Re: MIP 4x4 Ad and Part List
Posted: Fri Feb 25, 2011 3:19 pm
so you could by a belt upgrade interesting! how's yours coming along aaron? 
Re: MIP 4x4 Ad and Part List
Posted: Fri Feb 25, 2011 8:17 pm
just like everything else.Re: MIP 4x4 Ad and Part List
Posted: Thu Mar 07, 2013 10:58 pm
Here is a better scan of parts list.bscotti wrote:With all the hub-bub lately on the 4wd conversions, I thought I'd post this ... nice MIP brochure and a parts list. Thought it might be helpful to you owners out there ... I have a higher resolution scan of both pages if anyone wants it. Just PM me your email.
