Re: Shock Type and Length Confusion
Posted: Wed Mar 06, 2019 5:51 pm
Hi blubblood
From my limited experience...
Eyelet to eyelet measurements can be roughly estimated.
A .56 body with a .56 shaft should yield about 62mm eye to eye.
A 1.18 body with a 1.02 shaft should yield about 90mm eye to eye.
A 1.02 body with a 1.02 shaft should yield about 86mm eye to eye
Overall eye to eye length can be shortened by using spacers inside the shock.
Bottom shock eyelets come in a couple lengths, changing overall length as well. About +/- 2mm.
Using AE website can be a start to what length bodies and shafts are available.
The .56 (60mm eye to eye) will limit your selection.
If this is for an RC10, a tall front tower can open up more options with matching front/rear shocks.
Chuck
From my limited experience...
Eyelet to eyelet measurements can be roughly estimated.
A .56 body with a .56 shaft should yield about 62mm eye to eye.
A 1.18 body with a 1.02 shaft should yield about 90mm eye to eye.
A 1.02 body with a 1.02 shaft should yield about 86mm eye to eye
Overall eye to eye length can be shortened by using spacers inside the shock.
Bottom shock eyelets come in a couple lengths, changing overall length as well. About +/- 2mm.
Using AE website can be a start to what length bodies and shafts are available.
The .56 (60mm eye to eye) will limit your selection.
If this is for an RC10, a tall front tower can open up more options with matching front/rear shocks.
Chuck