Page 2 of 3
Re: After Works 91 parts?
Posted: Mon May 01, 2017 6:58 am
by Peakey
Shell looks good btw, looking back at your other pics it looks like you do have the finer belts on so I'd check with tough racing to see if there the ones they have before ordering. Plus another week point on the 91's were the rear hub carriers they tend to crack under impact that's why they changed them on the 92 and stayed like that till the 97 car
Re: After Works 91 parts?
Posted: Mon May 01, 2017 6:59 am
by olfrjf
Peakey wrote: ↑Mon May 01, 2017 6:54 am
The M2 is a fine pitch like the old Cats xls and Procat's where as the M3 is more like the modern cars belt pitch it's hard to tell from the pics but it does look like the fine pitch.
If it was me and I was going to run it then I'd change them for the M3 ones there easier to get and don't strip like the finer ones do but that means changing the diffs and layshaft.
thanks, you want to know the larger for the front for example?
Re: After Works 91 parts?
Posted: Mon May 01, 2017 7:12 am
by olfrjf
Front is 3.5mm larger.
Re: After Works 91 parts?
Posted: Mon May 01, 2017 11:06 am
by olfrjf
This is rear one.
tell me if it's M2 or M3 please?
Thanks
Olivier
Re: After Works 91 parts?
Posted: Mon May 01, 2017 12:01 pm
by jwscab
those look like M2
Re: After Works 91 parts?
Posted: Mon May 01, 2017 4:40 pm
by Peakey
Yeah look like M2 to me as well
Re: After Works 91 parts?
Posted: Mon May 22, 2017 5:03 am
by olfrjf
Ok Guys, bought the belt, but front isn't good one, i need
ZC653S M2 pitch 252t 504mm
++
Olivier
Re: After Works 91 parts?
Posted: Wed Jun 07, 2017 11:07 am
by Lonestar
HA! I knew I had seen this car somewhere
a+
Paul
Re: After Works 91 parts?
Posted: Sat Jun 24, 2017 9:48 am
by eco8gator
There is a belt on eBay right now...
NEW in package.
http://www.ebay.com/itm/311900200880
Regards
Re: After Works 91 parts?
Posted: Sun Jul 02, 2017 12:20 pm
by olfrjf
Thanks but it's 262T, i need 252T... the 653S model.
++
Olivier
Re: After Works 91 parts?
Posted: Wed Jul 05, 2017 6:02 am
by olfrjf
a01butal wrote: ↑Tue Jul 04, 2017 2:38 pm
I have 8 ZC-653S belts in stock, how many do you want? $20 a piece and shipping to France what ever that is. Message me if you are interested.
MP done guy
Re: After Works 91 parts?
Posted: Fri Dec 15, 2017 5:48 am
by olfrjf
Re: After Works 91 parts?
Posted: Fri Dec 15, 2017 5:55 am
by eugine
Cool
Re: Yokomo Works 91
Posted: Tue Feb 06, 2018 5:01 am
by olfrjf
Hi all, some news about my Yok
tonight, one old pack on carpet so
Old Orion RC-2000 gave 2400 on charge
front mini pin
rear mini dart
Reedy MR B's motor 15*3
Novak 410 MXC Esc
ouch, and yes, they are modern shocks (Xb4 Xray...
)
and go...
++
Olivier
Re: Yokomo Works 91
Posted: Tue Feb 06, 2018 5:10 am
by Lonestar
Lovely, even with the anachronistic shocks
I'm drooling at the Marnic Electrosac wing stickies - details that matter!!!
please tell me you didn't run this at Thurins, did you?!?
C'mon, share your impressions! How does she drive?!?
