Rc10B3 basher
-
- Approved Member
- Posts: 355
- Joined: Sun May 15, 2016 6:05 pm
- Location: Micronesia
- Has thanked: 14 times
- Been thanked: 5 times
Re: Rc10B3 basher
Is this a decent price, and all I would need?
http://m.ebay.com/itm/Team-Associated-RC10-B5-Factory-Team-FT-VTS-Slipper-Clutch-Top-Shaft-91175-91425-/322128859331?nav=SEARCH
http://m.ebay.com/itm/Team-Associated-RC10-B5-Factory-Team-FT-VTS-Slipper-Clutch-Top-Shaft-91175-91425-/322128859331?nav=SEARCH
- yellowdatsun
- Approved Member
- Posts: 844
- Joined: Mon Jul 20, 2015 1:15 pm
- Location: Phx, AZ
Re: Rc10B3 basher
Not if you want the "regular" one, which is the way I'd go. It would have one less slipper pad, the *correct* top shaft, and different slipper disks. Err, wait a second, I thought you had an RC10, not a B3????
The RC10 with a stealth needs these to upgrade to a B4 slipper, same goes for your truck you just got.
These do NOT have to be vented:
The RC10 with a stealth needs these to upgrade to a B4 slipper, same goes for your truck you just got.
These do NOT have to be vented:
-
- Approved Member
- Posts: 355
- Joined: Sun May 15, 2016 6:05 pm
- Location: Micronesia
- Has thanked: 14 times
- Been thanked: 5 times
Re: Rc10B3 basher
I ordered the slipper setup from tower. Here is their breakdown.
LXEAC1 Associated Top Shaft RC10B4 1 $7.79
LXZWK1 Associated Factory Team V2 Slipper Hubs 1 $9.99
LXZWK2 Associated Factory Team V2 Slipper Spring & Washer 1 $1.79
LXEAC7 Associated Slipper Pad RC10B4 (2) 1 $6.59
LXEAK2 Associated Kimbrough Spur Gear 81T 1 $4.69
LXEAC1 Associated Top Shaft RC10B4 1 $7.79
LXZWK1 Associated Factory Team V2 Slipper Hubs 1 $9.99
LXZWK2 Associated Factory Team V2 Slipper Spring & Washer 1 $1.79
LXEAC7 Associated Slipper Pad RC10B4 (2) 1 $6.59
LXEAK2 Associated Kimbrough Spur Gear 81T 1 $4.69
-
- Approved Member
- Posts: 355
- Joined: Sun May 15, 2016 6:05 pm
- Location: Micronesia
- Has thanked: 14 times
- Been thanked: 5 times
Re: Rc10B3 basher
I got the car in today. I'm really impressed. Nice original boxes a few extras , everything in really good shape.
It's a time capsule, and once I replaced the controller battery pack and threw a nicad in it everything worked.
But oh god is it slow. I could outrun this thing. I don't know what that little purple motor is, but it came with a reedy conquest so I may try that out.
It's a time capsule, and once I replaced the controller battery pack and threw a nicad in it everything worked.
But oh god is it slow. I could outrun this thing. I don't know what that little purple motor is, but it came with a reedy conquest so I may try that out.
-
- Approved Member
- Posts: 355
- Joined: Sun May 15, 2016 6:05 pm
- Location: Micronesia
- Has thanked: 14 times
- Been thanked: 5 times
Re: Rc10B3 basher
I took the controller apart and repaired the antenna, then I used the original instructions to program the ESC with the transmitter.
The motor was a 12 turn and it appears to have been wired backwards. I repaired some soldering on the reedy and installed it.
The motor was a 12 turn and it appears to have been wired backwards. I repaired some soldering on the reedy and installed it.
- klavy69
- Moderator
- Posts: 5150
- Joined: Thu May 29, 2008 4:11 pm
- Location: Fulton, IL (Land of one stop light but we DO have a windmill!)
- Has thanked: 561 times
- Been thanked: 265 times
Re: Rc10B3 basher
Good to hear it runs. Now go see the reason why the b3 is one of my personal faves
Todd
Todd
Peace and professionlism.....Kabunga signing off!!!
-
- Approved Member
- Posts: 149
- Joined: Mon Apr 18, 2016 7:31 pm
- Location: Pasadena, TX
- Has thanked: 1 time
- Been thanked: 19 times
Re: Rc10B3 basher
PM sent.
CANT EDIT OR DELETE THAT ONE KLAVY!
CANT EDIT OR DELETE THAT ONE KLAVY!
Current:RC10T, T3 FT, GT Blue Tub, GT FT, GT2 FT, GT5, RC28, SC28, Micro RS4.
Previous:B2, B3, B3 FT, 10T pink chassis, GT FT, TC3, TC3 FT, RS4MT
Tamiya TA02, Thunder Tiger TS4N pro, Kyosho VoneR, Emaxx, MX4, MP 7.5, 7.5 Kanai.
Previous:B2, B3, B3 FT, 10T pink chassis, GT FT, TC3, TC3 FT, RS4MT
Tamiya TA02, Thunder Tiger TS4N pro, Kyosho VoneR, Emaxx, MX4, MP 7.5, 7.5 Kanai.
-
- Approved Member
- Posts: 355
- Joined: Sun May 15, 2016 6:05 pm
- Location: Micronesia
- Has thanked: 14 times
- Been thanked: 5 times
Re: Rc10B3 basher
So, I'm getting a one tire fire situation, a violent one.
I'm going to pull it apart and take a look at the wheel bearings and diff to see if I can figure it out.
I'm going to pull it apart and take a look at the wheel bearings and diff to see if I can figure it out.
Re: Rc10B3 basher
I have several of these cars and absolutely love them. What I would recommend it that if possible use a shorty lipo pushed all the way up, then place the esc behind it. This places everything in the center of the car. I'll attempt to post a pic of what in talking about. Great looking car btw.
In Christ,
Joel C.
Joel C.
-
- Approved Member
- Posts: 355
- Joined: Sun May 15, 2016 6:05 pm
- Location: Micronesia
- Has thanked: 14 times
- Been thanked: 5 times
Re: Rc10B3 basher
Yes. I have the esc mounted on the rear shock tower because if is too tall for the body and the sensored motor cable is short. Interesting idea with a short battery. Got any part numbers?
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 23 Replies
- 2736 Views
-
Last post by Synergy
-
- 61 Replies
- 4612 Views
-
Last post by JosephS
-
- 8 Replies
- 1348 Views
-
Last post by Waz
-
- 2 Replies
- 628 Views
-
Last post by RCMA
-
- 11 Replies
- 1454 Views
-
Last post by adam lancia
-
- 3 Replies
- 943 Views
-
Last post by Snake Plissken
-
- 8 Replies
- 1323 Views
-
Last post by Kaare-65
-
- 6 Replies
- 892 Views
-
Last post by mikesofunny
Who is online
Users browsing this forum: GreenBar0n and 39 guests