Page 2 of 2
Re: Dmat's Nix91 + ten4 build
Posted: Mon Jan 25, 2016 6:01 pm
by tiger1
any news?
Re: Dmat's Nix91 + ten4 build
Posted: Mon Jan 25, 2016 11:04 pm
by DMAT
work has picked up as of late so im only working on this during the weekends. I sent to transmission case to shapeways to do a double check on my spacing so I'll know everything fits.
Once I know the spacing is good, I'll make the front case and design a top deck that works. I'm thinking I might use bell crank screws as a 2nd mounting point for the front transmission and have the bell cranks go underneath the front transmission.
Re: Dmat's Nix91 + ten4 build
Posted: Thu Feb 04, 2016 10:34 am
by DMAT
got my first stealth case in from shapeways. has its issues that will have to be dealt with. im having some issues with the motor plate, the screws wont go in unless I press on the plate but the misalignment is so small that I cant really see how its off.
On a side note, when I had the case printed up, it had several issues regarding wall thickness. I tried out shapeways print it anyways program and it successfully printed the areas that had issues too.