Re: Johnny's new DS builds
Posted: Sat Mar 03, 2012 3:18 pm
Loving the build! Great idea to paint the RPM logo in yellow! 
RC10Talk - The Net's Largest Vintage R/C Community
Re: Johnny's DS builds SELLIN OFF Just LMK
Page 2 of 6
Re: Johnny's new DS builds
Posted: Sat Mar 03, 2012 6:46 pm
Very nice looking cars. How much extra length do the SC10 blocks add to the front?
Re: Johnny's new DS builds
Posted: Sat Mar 03, 2012 7:38 pm
its so close you can't tell....Thanks For Looking.....JohnnySr
Re: Johnny's new DS builds
Posted: Sun Mar 04, 2012 1:44 am
me like....... 
......... ahem ahem ahem....
......... ahem ahem ahem....Re: Johnny's new DS builds
Posted: Sun Mar 04, 2012 9:39 am
AAAAAlllllllllrrrrrrrriiiiiiiigggggghhhhhhttttttttyyyyyyyyyyyy.........stock DS axel to axel front to rear is 10.50 or 10 1/2 " rear width 7.75 front 7.50 DS with sc10 front hex conversion front to rear 10.50 front width 7.50 rear 7.75.....hope this clears all questions up....Thanks Johnny
Re: Johnny's new DS builds
Posted: Sun Mar 04, 2012 10:58 am
Very interesting. Is that measurement to the tips of the front axles or to the outside of the spindle blocks? I figured the B4/SC10 parts would push the front out some because of the wheel offset the buggies have....maybe the hexes make up the offset.
I appreciate you taking the time to get the measurements. Thanks.
I appreciate you taking the time to get the measurements. Thanks.
Re: Johnny's new DS builds
Posted: Sun Mar 04, 2012 12:16 pm
Tip To Tip...
Re: Johnny's new DS builds
Posted: Mon Mar 05, 2012 3:16 am
Nice, I have seen rccarbonworks stuff on ebay a bit. I had no idea they had their own site. Looks good.
Re: Johnny's new DS builds
Posted: Mon Mar 05, 2012 9:49 am
Yes, I talked to Dan last night and he has some new parts coming....and a new surprise also ..an adapter to run the big offset hex wheels on early cars......JohnnySr
Re: Johnny's new DS builds
Posted: Sat Mar 10, 2012 3:08 pm
Finally got a body..but need to get smaller tires / wheels..
Re: Johnny's new DS builds
Posted: Sat Mar 10, 2012 3:14 pm
That really sets it off, with paint it will be really nice. It is one of my favorite bodies. Looks good!
Re: Johnny's new DS builds
Posted: Sat Mar 10, 2012 5:06 pm
.................................................DEAD...POOL...................................... 
Re: Johnny's new DS builds
Posted: Mon Mar 12, 2012 2:00 am
rc10johnny wrote:Finally got a body..but need to get smaller tires / wheels..img]http://i906.photobucket.com/albums/ac262/rc10johnny/100_1361.jpg[/img]
Johnny, are the offsets on the VTA wheels too much? Perhaps 0mm offset would work better all the way around? Perhaps 31mm is too wide in the rear as well? I was thinking about just getting 26mm wheels all the way around with 0 offset.
Also, does anyone know if tc3 cvd bones will work if I use B3 or B4 axels on a DS?
Re: Johnny's new DS builds
Posted: Wed May 09, 2012 12:46 pm
and here she is nowrc10johnny wrote:Well I just had to start another DS build so here goes again figured the pics out.. in thenext post's....OK! OK! DUH!!!!!! Johnny
Re: Johnny's new DS builds
Posted: Wed May 09, 2012 12:48 pm
That looks sweet Johnny, I like the look of the wheels and body combo