YZ10 1994 (My 3rd Dog fighter)

[geeforce59]

This looks like a nice project - everything is there, it just all needs a good clean & a bit of 'elbow grease' to make it into a good looking buggy again

I'm guessing you got it for a good price??

P.S; Its been along while since i've seen a set of those Schumacher bar-spike tyres

well it will take some time before this yoke will bloom again!

The front tires are Tamiya Super gripper and the rear tires are Hot Laps NTR-31

[geeforce59]

My first thought was they're Tamiya Hybrid tires that came with the Egress, I just can't see the "Tamiya Super Gripper" letters on the sidewall.

Marvin,

You are correct! you have a very sharp eyes!

I just check it now with my Ott-lites!

[Bimdapogs]

I didn't really see the letters, but I did remember the spike pattern as I planned to find a set for my upgraded Avante but gave up the idea when I found out how much they go for.

[geeforce59]

I didn't really see the letters, but I did remember the spike pattern as I planned to find a set for my upgraded Avante but gave up the idea when I found out how much they go for.

Would you like me to send it to you for free? just pay the shipping!

The tires are not really good to hit the surface but good for display with a little dab of Armor All or Son of a Gun!

My problem is how i am going to remove this tires on the wheels in one piece!

[aip47-2008]

Acetone dip!

[geeforce59]

Acetone dip!

do you think it will not melt the wheels???

[Daddeo]

As long as the rims are not made by Duratrax they will be fine. Acetone should only melt the glue.

[GJW]

the buggy is very original and the rim's certainly look like yokomo, just dap a little acetone on the inside of the rim as a test spot.

[Jay Dub]

Those look to be yokomo rims, which will be fine in the acetone. After the tires are removed, clean thoroughly with soap and water. Then peroxide them for 3-4 days in the sun, and they will look like new . -Jeff

[geeforce59]

some more photos before dismantling!

[geeforce59]

[Jay Dub]

It appears to be in very nice shape. Just a little cleaning to be a shelfer.

[geeforce59]

It appears to be in very nice shape. Just a little cleaning to be a shelfer.

Yes! most of the screws are pretty rusted plan to replace it with hex type screws and rebuilt the diffs. while im soaking the white nylon parts in HP

[Coelacanth]

As long as the rims are not made by Duratrax they will be fine. Acetone should only melt the glue.

Or Marui. Acetone will melt Marui plastic wheels.

[slow_jun]

any updates on this? pics... puh-leassssseeee......
just new to Yokomo, noticed that a Slipper (TCS) is not a standard on the yz unlike in AE?....
also there are no servo post hole on the 91 (please correct me) and most of the yoke i've seen, or i may not have seen
enough....

Nong,

got the YZ, any help in how i can retro fit a Slipper into it? similar to a AE b4? ...hmmmmm.....