Stealth transmission hole template

[fredswain]

Sweet. Now I don't need to do it!

[oldmanian]

I measured/documented an entire chassis a couple of years ago on an optical comparator. Here's the rear section: http://www.tunneltwo.com/rc/rc10_chassis_rear_hole_pattern.pdf

Just print 1:1 and drill to your heart's content.

Regards,

Robert

Big thanks for posting this link.... It'll make frilling the stealt holes a much nicer experience.....

[UjsW8nC]

The links don't work anymore....someone please help!! I just bought a woven TQ10 Graphite chassis....in B+ condition. I also just finished assembling a brand new Stealth Transmission. I do not want to mess this up so I really need the template. Also, any ideas on countersinking the holes?

HELLLLLP hahah

[UjsW8nC]

I measured/documented an entire chassis a couple of years ago on an optical comparator. Here's the rear section: http://www.tunneltwo.com/rc/rc10_chassis_rear_hole_pattern.pdf

Just print 1:1 and drill to your heart's content.

Regards,

Robert

Big thanks for posting this link.... It'll make frilling the stealt holes a much nicer experience.....

Anyone still have this template??

[XLR8]

If all else fails, you can use a stock aluminum chassis pan for a template. Just bolt-on your graphite chassis using the rear suspension mounting holes and drill the four tranny holes.
If you need a cheap stock chassis to use for a template, here's one on ebay for a little more than 20 bucks -- there might be others for less money, I just spent a few minutes and found this one. It's pretty rough underneath but the holes appear to be in good shape. You can always resell the chassis or keep it for a future build.

https://www.ebay.com/itm/associated-rc10-buggy-truck-C-chassis-13/144001421417?hash=item2187275069:g:U1UAAOSwlDZgbnfs

Edit: Here's a cheaper one:
https://www.ebay.com/itm/associated-rc10-buggy-truck-chassis-3-Painted/133694064628?hash=item1f20c987f4:g:VHYAAOSwXplgTqvQ

...comes with a battery cup and antenna mount, not bad for 10 bucks.