Need help identifying these tranny gears
- littleVETTE
- Approved Member
- Posts: 1418
- Joined: Mon Aug 11, 2008 4:07 pm
- Location: U.S.A.
- Has thanked: 6 times
- Been thanked: 9 times
Re: Need help identifying these tranny gears
damn, i'm speechless. you must really got mad at that gear.
been there.
keep an eye out for one. they usually pop up here and there.
been there.
keep an eye out for one. they usually pop up here and there.
Re: Need help identifying these tranny gears
Yea im not happy about it at all, went all over ebay and nothing tried contacting the sellers I have saved that might have it and nothing there as well
- lowrydesign
- Approved Member
- Posts: 574
- Joined: Thu Jan 01, 2009 6:40 pm
- Location: Arizona
- Has thanked: 11 times
- Been thanked: 17 times
Re: Need help identifying these tranny gears
you may be able to clamp it, then silver solder it back together, and then file the extra off...
-
- Approved Member
- Posts: 1280
- Joined: Tue Dec 30, 2008 3:02 am
- Location: michigan
- Been thanked: 87 times
Re: Need help identifying these tranny gears
ouch!! what happened ? I would just put it away in a box forget about it and find a stealth . By the time you find the gear you can drill your chassis and install a stealth . At least you can still by new stealth parts. If that gear were to have spit on me I would have stood back looked at it and smashed it with a sledge hammer. Just kidding . I think we have all been there at one time or another in this hobby. good luck.
Re: Need help identifying these tranny gears
Well I have a stealth on ebay right now since I picked up 2 rc10t's and decided to part the 2nd out, have the 6gear tranny as well on there with the stock gears but I really want to get this one fixed. Guy I got it from did the mods that was on rcca back in 91 and I was amazed at how well this tranny feels spins great. So put it on the shelf for now and hope someone has one sometime.
Another question, I picked up some losi x pattern tires are those 2.2?
How about these not sure who or what they fit
Another question, I picked up some losi x pattern tires are those 2.2?
How about these not sure who or what they fit
- littleVETTE
- Approved Member
- Posts: 1418
- Joined: Mon Aug 11, 2008 4:07 pm
- Location: U.S.A.
- Has thanked: 6 times
- Been thanked: 9 times
Re: Need help identifying these tranny gears
Savage03 wrote:Well I have a stealth on ebay right now since I picked up 2 rc10t's and decided to part the 2nd out, have the 6gear tranny as well on there with the stock gears but I really want to get this one fixed. Guy I got it from did the mods that was on rcca back in 91 and I was amazed at how well this tranny feels spins great. So put it on the shelf for now and hope someone has one sometime.
Another question, I picked up some losi x pattern tires are those 2.2?
How about these not sure who or what they fit
the x-pattern's are 2.0, and i think those wheels are losi truck wheels.
Re: Need help identifying these tranny gears
Thanks for the info. So the x patterns will fit the 3 piece rims then.
- littleVETTE
- Approved Member
- Posts: 1418
- Joined: Mon Aug 11, 2008 4:07 pm
- Location: U.S.A.
- Has thanked: 6 times
- Been thanked: 9 times
Re: Need help identifying these tranny gears
if the tires are 2.0, and if those wheels ARE truck wheels i don't think so. just put the tire up against the wheel, if the outside diameter of the wheel is larger than the inside diameter of the tire than no, it will not fit. UNLESS you have a x-pattern truck tire?
-
- Approved Member
- Posts: 8921
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Been thanked: 8 times
Re: Need help identifying these tranny gears
I think Princedteve has one of the F/S in the BSTSavage03 wrote:
Re: Need help identifying these tranny gears
Sent a request in to get access to there, how long does it usually take?
Re: Need help identifying these tranny gears
He sure does, thanks a million for the heads upCharlie don't surf wrote:I think Princedteve has one of the F/S in the BSTSavage03 wrote:
Re: Need help identifying these tranny gears
Yea I have al buggy stuff but the x patterns dont fit the 3 piece buggy rims so what are my options?littleVETTE wrote:if the tires are 2.0, and if those wheels ARE truck wheels i don't think so. just put the tire up against the wheel, if the outside diameter of the wheel is larger than the inside diameter of the tire than no, it will not fit. UNLESS you have a x-pattern truck tire?
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 5 Replies
- 773 Views
-
Last post by Brat
-
- 5 Replies
- 1735 Views
-
Last post by badhoopty
-
- 10 Replies
- 1923 Views
-
Last post by radioactivity
-
- 6 Replies
- 1352 Views
-
Last post by jwscab
-
- 3 Replies
- 762 Views
-
Last post by Vand_rc
-
- 4 Replies
- 634 Views
-
Last post by treehugger
-
- 3 Replies
- 714 Views
-
Last post by liltexmp
-
- 5 Replies
- 822 Views
-
Last post by XLR8
Who is online
Users browsing this forum: No registered users and 6 guests