RC10Talk - The Net's Largest Vintage R/C Community

Thanks for the compliments! its a real beauty and i don't even want to touch anything from now.

Still digging some of my old stuffs to install on this Works, Hmmmmn! i remember i still got a Novak 410M5 and 410HPc somewhere and my Old trusty Airtronics XL2P sob! the antenna is broken and the receiver is busted. Hey! i still got the Futaba Magnum PCM1024 75hrz radio with a hitec FM rx ha!ha! yeah! that will be perfect for my works project.

For the past few months I was struggling to find a spare fine pitch belts for my Works 91 and look what I found a spare parts and a spare works 91.

Nice Rig Gen, Jun here, this lot looks familiar, i got the Yoke Rims and Tires for my RC10 from Ang_Bida. Saw that you also got the spare Yz as spare... am i right? let me know if you can spare me a couple of 2.2 Rims. huh.. (parang awa mo na.)

nice though... two thumbs up!!!!

slow_jun wrote:Nice Rig Gen, Jun here, this lot looks familiar, i got the Yoke Rims and Tires for my RC10 from Ang_Bida. Saw that you also got the spare Yz as spare... am i right? let me know if you can spare me a couple of 2.2 Rims. huh.. (parang awa mo na.)

nice though... two thumbs up!!!!

hey! nice to see here slow_jun! yeah! i got this rig from eric very nice fellow and he hand over it to my son. i will be rebuilding it once i go this summer in the Philippines.

What 2.2 rims do you want by the way, for your RC10? or Yokomo! well right now i have spare white 2.125 front and rear yokomo rims, i think what you are looking for is the one eric has, the one on the pictures with RC10 wheel adaptor.

That i already got it from Him (c/o Ang_Bida), still looking for reserve. Just in case i do finish my RC10. anyway let me know should you know of someone in PH who has spare for RC10. Converting to 2.2 (B4 Rims) is a bit expensive... hahaha for now this will be just a work around...

cheers!!!!

I dont know anybody has spares in P.I. for RC10 except Mark, and i believe that he is selling his RC10 graphite chassis with signature of Maasaki Hirosaka!

I got two RC10 Worlds edition but no spares and i dont have any intension of modifying or convertion, i will keep it basically stock.

still under nego with my wife if i can buy Mark'S RC10 ,anyway will contact him when i get home thos March.

Thanks.

Some updates of my works 91 project, trying to fit my old electronic stuffs on it!

Wow, i can still remember i had the same esc as yours. I have a stupid question gen, the white 2.125 rims that you are saying (the one i got from eric) will 2.2 tires fit into that one?i saw that it has a rubber band on both side where the tires sits. coz when i tried fitting one seems like there is a slight "play" on both sides of the tires with respect to the rims. is this ok or just need to put some CA inbetween? not so familiar with Yoke tires and wheels.....

well the purpose of those rubber band is to snug fit the newer 2.2 tires, however there will be a play or slip when you try to rotate the tires on the wheel.

just glue it properly with a good quality CA, in my case i use rubber cement to glue my tires, its easy for me to remove without ripping the lips of the tires. because i still keep those bald vintage tires.

yeah! its all my old stuffs and its working perfectly!

Just received the bodies this morning from Mr. Lexan 'Thanks Jay!'

check this out!

Here are the bodies i have received!
The package! The 870C The Protech IV Thank You very much Mr Lexan!

Glad they showed. Enjoy!

geeforce59 wrote:
check this out!

YZ10_01aa.jpg

YZ10_16aa.jpg

That guys head must seriously be up there in the clouds. No way is anyone going to pay that price for the condition its in He thinks thats new ???

NRG wrote:

geeforce59 wrote:
check this out!

YZ10_01aa.jpg

YZ10_16aa.jpg

That guys head must seriously be up there in the clouds. No way is anyone going to pay that price for the condition its in He thinks thats new ???

yeah! that's what he thinks!