Page 9 of 18

Re: jay halsey replica (updated)

Posted: Thu Aug 21, 2008 7:03 pm
by scr8p
thanks guys. :)

yup, i'm looking for the jg decal in the pic that jay posted. the one i used on the car is from an autographics mini-sheets. to make it look similar, i cut the wings (i guess that's what they are :? ) off of either side. i kinda wish i had a larger reedy decal on the roof, too. but, that's the largest size i have that is just the outline of the letters.

Re: jay halsey replica (updated)

Posted: Thu Aug 21, 2008 8:13 pm
by aconsola
I checked all the NIP JG parts I have and my spare sticker bin too, and every one of them is a fluorescent color. :(
I was thinking maybe the white was from one of those autographics sponsor sheet sets, being as several of the other stickers were also autogrphics, but I guess you ruled that one out already.

Re: jay halsey replica (updated)

Posted: Fri Aug 22, 2008 1:04 am
by BTracer
And you had the cojones to use an original 6160. Very admirable :)

Re: jay halsey replica (updated)

Posted: Fri Aug 22, 2008 4:28 am
by Dr. Robotnik
Excellent JH poster, posted by Lastenfield...

http://www.rc10talk.com/viewtopic.php?f=7&t=6769

Re: jay halsey replica (updated)

Posted: Fri Aug 22, 2008 11:26 pm
by scr8p
Dr. Robotnik wrote:Excellent JH poster, posted by Lastenfield...

http://www.rc10talk.com/viewtopic.php?f=7&t=6769
that's awesome. now i know how to trim the wing. it's hard to tell in the magazine ad with the white background.

i'm gonna keep my eyes open for a pretty nice A stamp tub to replace the one i have. i'm kinda thinking that the pic of halsey's car a few pages back with all of the holes drilled in it (the reason i drilled mine), isn't really his. although i could be wrong. but there's an article in the scan archives where he says he doesn't drill holes in his chassis because of it allowing dirt to get inside, or something along those lines. not to mention, all of the pics that i KNOW are halsey's car, the tub isn't drilled.

i also need to relocate my electrics and move my antenna, going by this pic. and get a white battery cup with a fiberglass hold down. :wink:

Re: jay halsey replica (updated)

Posted: Sun Aug 24, 2008 4:16 pm
by cowsrneat2002
Whose or what wing did you use Scr8p??

Re: jay halsey replica (updated)

Posted: Thu Sep 11, 2008 11:52 pm
by n33no
I just finish watching The Dead Pool. And that Jay Halsey car was in it. Great movie btw

Re: jay halsey replica (updated)

Posted: Fri Sep 12, 2008 7:59 am
by mrlexan
cowsrneat2002 wrote:Whose or what wing did you use Scr8p??
He currently has a Kimborough wing installed that is still available on Tower.

Re: jay halsey replica (updated)

Posted: Fri Sep 12, 2008 4:59 pm
by scr8p
mrlexan wrote:
cowsrneat2002 wrote:Whose or what wing did you use Scr8p??
He currently has a Kimborough wing installed that is still available on Tower.
yup, a kimbrough. it might not be exact, but it's real close.

Re: jay halsey replica (updated)

Posted: Sun Sep 14, 2008 12:20 am
by surferdave71
such a sweet 10 man, congrats on a beautiful build, that picture makes a nice background too.

Re: jay halsey replica (updated)

Posted: Thu Sep 03, 2009 8:24 am
by prp
Hi every body,

On the NOVAK site, they say that Jay used a Novak 1 on his car like Gil Losi in 4wd:

"Novak establishes themselves as pioneers in the R/C speed control market with the design and introduction of their first electronic speed control, the NESC-1. By comparison to today's speed controls, the NESC-1 featured an on-resistance of 0.0025 ohms (4.3 times the Cyclone's on-resistance of 0.00058). Novak's speed control line is completed with the introduction of the NESC-2, NESC-4, and NESC-1X. Electronic speed controls make their first World Championship appearance at the 1985 Off-Road Worlds, with both Jay Halsey (2WD) and Gil Losi Jr. (4WD) using the NESC-1 to capture World Titles."

Jay finally used a Novak 4 or a Novak 1 in 2wd on WC 85' ?????

Bye PRP.

Re: jay halsey replica (updated)

Posted: Thu Sep 03, 2009 12:51 pm
by slotcarrod
That build is dead sexy scr8p, great info as well! Thanks for sharing!

Re: jay halsey replica (updated)

Posted: Thu Sep 03, 2009 2:38 pm
by Tobbe70
This is so cool - I am a complete RC10-newbie but this thread was/is extremely interesting and I really admire Your painting / modellingskills! Supersharp looking car!

Re: jay halsey replica (updated)

Posted: Thu Sep 03, 2009 8:33 pm
by scr8p
prp wrote:Hi every body,

On the NOVAK site, they say that Jay used a Novak 1 on his car like Gil Losi in 4wd:

"Novak establishes themselves as pioneers in the R/C speed control market with the design and introduction of their first electronic speed control, the NESC-1. By comparison to today's speed controls, the NESC-1 featured an on-resistance of 0.0025 ohms (4.3 times the Cyclone's on-resistance of 0.00058). Novak's speed control line is completed with the introduction of the NESC-2, NESC-4, and NESC-1X. Electronic speed controls make their first World Championship appearance at the 1985 Off-Road Worlds, with both Jay Halsey (2WD) and Gil Losi Jr. (4WD) using the NESC-1 to capture World Titles."

Jay finally used a Novak 4 or a Novak 1 in 2wd on WC 85' ?????
i know. i've never managed to score a novak 1. that's why i have the 4 in there. one day it'll be right. :wink:

Re: jay halsey replica (updated)

Posted: Thu Sep 03, 2009 11:10 pm
by 62 bugzilla
Very nice car and well detailed.