I get the feeling that we may well mate.RC10th wrote:Will we be seeing this turn laps at MP?
#6002 - RC10 Worlds Car Kit
- mtbkym01
- Super Member
- Posts: 399
- Joined: Sat Dec 17, 2011 3:31 pm
- Location: South Australia
- Has thanked: 170 times
- Been thanked: 129 times
Re: #6002 - RC10 Worlds Car Kit
Re: #6002 - RC10 Worlds Car Kit
could someone tell me what size bearings I need for the steering please.
also, anything else I 'need' for the car ? like are the stock turnbuckles ok? change to VTS slipper maybe??
My car is going to be raced, it's actually replacing my 4.2
well, at least until I get my 5M
also, anything else I 'need' for the car ? like are the stock turnbuckles ok? change to VTS slipper maybe??
My car is going to be raced, it's actually replacing my 4.2
well, at least until I get my 5M
- GoMachV
- Super Member
- Posts: 11376
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 837 times
- Been thanked: 2498 times
Re: #6002 - RC10 Worlds Car Kit
stulec52 wrote:could someone tell me what size bearings I need for the steering please.
Patiofurnituregt wrote:Quite simply, cost and being a little more true to the original. Those 1/4"x 3/8" flanged bearings are certainly not the cheapest of the bearings to include.GoldRush wrote:well my worlds kit has some 90's era parts in it now ....found 4 flanged bearings for the bell cranks...now my steering is smooth. why wouldn't associated just put bearing in the bell cranks over bushings? kinda stupid. I mean its not like im going for spot on 100% accurate worlds car here.
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
Re: #6002 - RC10 Worlds Car Kit
I kinda thought it might be those.gomachv wrote:stulec52 wrote:could someone tell me what size bearings I need for the steering please.Patiofurnituregt wrote:Quite simply, cost and being a little more true to the original. Those 1/4"x 3/8" flanged bearings are certainly not the cheapest of the bearings to include.GoldRush wrote:well my worlds kit has some 90's era parts in it now ....found 4 flanged bearings for the bell cranks...now my steering is smooth. why wouldn't associated just put bearing in the bell cranks over bushings? kinda stupid. I mean its not like im going for spot on 100% accurate worlds car here.
Was hunting around Tower, but after seeing the price I had hoped not
Oh well, thanks for confirming.
- GoMachV
- Super Member
- Posts: 11376
- Joined: Sun Apr 29, 2012 10:31 pm
- Location: Twin Falls, ID
- Has thanked: 837 times
- Been thanked: 2498 times
Re: #6002 - RC10 Worlds Car Kit
Boca and other bearing places are $1 a pop
It's time to stand up to the bully. Support the companies that support the industry, not the ones that tear it down. Say no to Traxxas
Factory Works website
Factory Works website
Re: #6002 - RC10 Worlds Car Kit
I bought mine from oldrc.com .. like to support guys on here when I can.. I think it was $2.99 for a pair..
Shawn
Shawn
- RichieRich
- Approved Member
- Posts: 2352
- Joined: Wed Jun 14, 2006 11:42 pm
- Location: Los Angeles, CA
- Has thanked: 34 times
- Been thanked: 19 times
Re: #6002 - RC10 Worlds Car Kit
I feel like a tard. I thought I ordered my worlds car a while back but it was just sitting in my online shopping cart. Duh. So, it should be delivered today. I wonder if there are any running production changes.
Re: #6002 - RC10 Worlds Car Kit
That raises an interesting question. If this isn't a limited release, will kits purchased a year from now still have the same issues?
RichieRich wrote:I feel like a tard. I thought I ordered my worlds car a while back but it was just sitting in my online shopping cart. Duh. So, it should be delivered today. I wonder if there are any running production changes.
RC10 Short Arm | Novak Tempest ESC | Tamiya Torque Tuned 25T | Savox 1258 | Stealth Trans w/ Exotek Slipper Eliminator (geared 24/81)
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258
- abailey21
- Approved Member
- Posts: 273
- Joined: Sun Feb 13, 2011 8:28 am
- Location: Leander TX
- Been thanked: 2 times
Re: #6002 - RC10 Worlds Car Kit
I've been busy...
Worlds runner
Graphite (half original, half rere to complete it)
Classic rere (not sure what I'm going to do to finish it, running or shelfer)
B5 Rear (still need motor, battery, receiver and servo)
Worlds runner
Graphite (half original, half rere to complete it)
Classic rere (not sure what I'm going to do to finish it, running or shelfer)
B5 Rear (still need motor, battery, receiver and servo)
- RichieRich
- Approved Member
- Posts: 2352
- Joined: Wed Jun 14, 2006 11:42 pm
- Location: Los Angeles, CA
- Has thanked: 34 times
- Been thanked: 19 times
Re: #6002 - RC10 Worlds Car Kit
Ok, my car was delivered on Wed. Cracked open the box right away. Everything seems in order. Packed 3/17 according to the slip inside. I can't wait to start the build. I need to get some bearings for the steering and I'll be set.
Re: #6002 - RC10 Worlds Car Kit
I really hope that the problems don't continue. mine is currently sitting on the shelf bare of electronics and I stripped the tires off of it for my new b5m. I have yet to receive my top shaft from associated and I know the cva bones popping out of the outdrives is gonna continue to be an issue and my idea of putting more shims to get the bone end further into the outdrive is simply not gonna work. the 2mm I need is not gonna be acheiveable because then the crosspin will be bound on the bearing so my almost $300 super bitchen worlds car re re is mearly an expensive shelf ornament at this time. if I wanted to look at an expensive worlds car shelf ornament I would have bought a real worlds car to have sitting up there to look at. maybe I will buy another one next year and see if the same issue is there or associated has been silently watching the web forums waiting for us to tell them what the problem is with their production cars and will have fixed the issues and fired heir blind machinist. I'm 110% sure their prototype didn't have these issues . ive got a few sets of cvd's laying around that im gonna see what fits better and im stripping a top shaft out of an old b4 trans I have and ive ordered some rpm ball cups so that my re re worlds is ready to rock when I get some more electronics.ca-rj wrote:That raises an interesting question. If this isn't a limited release, will kits purchased a year from now still have the same issues?
do you think its a bad twilight zone episode for team associated to be re producing a buggy from yesteryear that is capable of beating their latest and greatest production buggy?
- RC10th
- Approved Member
- Posts: 4317
- Joined: Sat Feb 16, 2013 9:51 am
- Location: Australia
- Has thanked: 41 times
- Been thanked: 1047 times
Re: #6002 - RC10 Worlds Car Kit
Geez, that was fast.... Feel like painting some of mine ?
I was old school - when old school wasn't cool !
- mtbkym01
- Super Member
- Posts: 399
- Joined: Sat Dec 17, 2011 3:31 pm
- Location: South Australia
- Has thanked: 170 times
- Been thanked: 129 times
Re: #6002 - RC10 Worlds Car Kit
haha, yeah it was just waiting for the Pearl White that I grabbed today mateRC10th wrote:Geez, that was fast.... Feel like painting some of mine ?
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 10 Replies
- 1232 Views
-
Last post by sandkil
-
- 4 Replies
- 3449 Views
-
Last post by scr8p
-
- 6 Replies
- 1154 Views
-
Last post by XLR8
-
- 7 Replies
- 773 Views
-
Last post by AndrewCooke
-
- 2 Replies
- 918 Views
-
Last post by ASC6000
-
- 0 Replies
- 1717 Views
-
Last post by mytimac
-
- 13 Replies
- 1846 Views
-
Last post by XLR8
-
- 1 Replies
- 945 Views
-
Last post by scr8p
Who is online
Users browsing this forum: No registered users and 4 guests