RC10T

[bearrickster]

Will this body fit the Rc10T ??

Associated Ford Truck Body:RC10T3 ASC6139

[scr8p]

the body will fit nice, you just need to use a single body mount in the rear. pretty much like the rc10 buggy (on trans brace), but taller.

[RC Chick]

you can aslo use a 10T2 body.

[bearrickster]

I looked for a T2 body but I couldnt find one ?

[toykilla]

I looked for a T2 body but I couldnt find one ?

ebay usually has them

[tecnica2001]

Here you go Rick:

http://cgi.ebay.com/Associated-6132-Racing-Truck-Body-Clear-RC10T2_W0QQitemZ110294459744QQcmdZViewItemQQptZRadio_Control_Parts_Accessories

I posted pictures of the 10T with a T3 body, and they fit ok, but the T2 body fits almost perfect.

[bearrickster]

Thanks

[bearrickster]

You know I think I have one on my LX-T? what do you think? I had to move my shocks to the front or the tower? it didnt fit that well? but it all I had?

[Group B]

I've found that the T2 body fits the 10T best when using the RPM adjustable-width body mounts, which comes as one set including both front and rear mounts - I love 'em!:

http://www.rpmrcproducts.com/products/assoc/hires/8054.htm



When mounting the T2 body on my 10T, I setup the mounts just as they are on the bottom of the above picture: The front mounts on the wide setting (installed the front body posts to the outer holes on the bracket), and I set the rear mounts on the narrow setting (installed the two L-shaped rear body posts so that the small legs of the "L" face each other).

Hope this helps,

David

[bearrickster]

I use those on my Losis all the time so I have some thank you

[Brat]

Rick, that Andy's LXT body will not work. 10T rear damper stay is too wide. LXT damper stay is narrower. I tried it on my RC10T before the trade. Hope this help. PS: Actually i really like the shape of the LXT but too bad it can't fit my RC10T.

[bearrickster]

Its a super nice body but it doesnt reaally fit the LX-T great either I had to move the shocks in front of the tower so I need to shim them out on the bottom. but it looks good and the LX-T is enjoying retirement so it doesnt matter.I am happy with it. thanks Brat

[Brat]

Have you got it painted?

[bearrickster]

no My LHS closed theirs no were to get paint I am going to paint all of my cars this summer. I dont have the paint time or drive untill school is over.

[rctenracer]

The T2 body and T3 body are almost the same acept for the grill work . The T2 has a bit more clearance molded in for the rear shock tower .