RC10 Graphite, looks to be in great shape, I put on a set of Trinity Wheels with some Trinity Mini Pin tires on the rear and a set of Proline Dirt Flirter or something tires on Front. The bottom of the chassis barely has any scratches, I need a body, wing. Still undecided wheter to keep it or sell it on the bay.
Life is like a box of chocolate, you never know what R/C car you're gonna get next!!!
I have yet to really notice busted up graphite RC10's. I have a early and late model myself and I have to really look at them hard to even notice if they have been run before!
I figured the only way to get a coffin chassis RC10 Graphite is to have a replica chassis made. Since I have an extra later model RC10 Graphite in nice condition, it seems like a good option for the making a coffin chassis style buggy.
Disclaimer...
Last post
I decided which one gets the skeleton chassis and 48p Thorp 6 gear setup.
.
PXL_20230921_154526689~2.jpg
.
PXL_20230921_155143944~2.jpg
.
PXL_20230921_155511891~3.jpg
.
PXL_20230921_162536099~2.jpg
Could you guys tell me the differences between a regular RC10 Graphite and a RC10 Graphite Team car besides the obvious...teflon shocks and stealth tranny? thanks in advance!
Last post
Thanks guys I found exactly what I needed thanks to you guys. I appreciate it.
I never had one of these versions when I was younger, I went right from the standard 6036 chassis with the AE logo to the B2--but this is what was around Upstate New York when we did get these cars in the last month or two before the b2 was...
I got this off of ebay ~3 years ago. I have been running it everywhere since. I thought, since i have destroyed the body, that it would be nice to clean it up, buy a new body and photograph it. I have cleaned it up, put it back together, and am...
Last post
The new traxxas plug is a good plug no dout... But for a RC10 I would use deans. Thats just my 2 cents :D
This is my rc10 graphite . Ive went for the b4 rear hubs and b44 cvd's ive used these because i had them in the bits and bobs box. the shocks are the older b4 ones i had them kicking about to but the front one's are to long the chassis does not...
This will be my first time building a new in box rc10 in about 30 years. I am building this up with a graphite chassis I picked up and didn't have a specific build for.
IMG_3473.jpeg
The front end went together well. You can see some small voids...
Last post
IMG_3527.jpeg
Here is a photo of it where it’s going to stay.
I have located a body for this. I’ll leave it like this for a bit and get the body on it when it’s time for a decor change.